前言： 在实际生产或者实验环境下，我们经常会碰到磁盘使用完了，不够用，需要增加硬盘或者直接扩展容量，又或者整个系统全部删除然后进行增加硬盘进行重装系统，但是删掉系统重新进行安装付出的时间或者其他成本都太大了，所以我推荐如果是虚拟化平台直接增加一块硬盘或者扩大容量，本篇文章根据直接扩大硬盘容量
一、 实验环境说明
- 虚拟化平台是VMware workstation 12 pro
- Centos 7.1 最小化安装
- 初始硬盘为 50G
二、开始实验
- 系统信息
[root@Allenwu ~]# lsb_release -a
LSB Version: :core-4.1-amd64:core-4.1-noarch
Distributor ID: CentOS
Description: CentOS Linux release 7.1.1503 (Core)
Release: 7.1.1503
Codename: Core
- 硬盘信息
[root@Allenwu ~]# fdisk -l
Disk /dev/sda: 53.7 GB, 53687091200 bytes, 104857600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x0009c3d0
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1026047 512000 83 Linux
/dev/sda2 1026048 41943039 20458496 8e Linux LVM
/dev/sda3 41943040 104857599 31457280 83 Linux
Disk /dev/mapper/centos-root: 49.9 GB, 18756927488 bytes, 36634624 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/mapper/centos-swap: 2147 MB, 2147483648 bytes, 4194304 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
- 进行关机扩大硬盘，然后开机进入系统
shutdown -h now
图片.png
- 确认硬盘已经进行扩容，可以看到已经扩容，但还没进行使用
[root@Allenwu ~]# fdisk -l
Disk /dev/sda: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x0009c3d0
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1026047 512000 83 Linux
/dev/sda2 1026048 41943039 20458496 8e Linux LVM
/dev/sda3 41943040 104857599 31457280 83 Linux
Disk /dev/mapper/centos-root: 49.9 GB, 49895440384 bytes, 97452032 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/mapper/centos-swap: 2147 MB, 2147483648 bytes, 4194304 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
- 使用 fdisk 进行分区，创建一个sda4主分区
[root@Allenwu ~]# fdisk /dev/sda
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): n
Partition type:
p primary (3 primary, 0 extended, 1 free)
e extended
Select (default e): p
Selected partition 4
First sector (104857600-209715199, default 104857600):
Using default value 104857600
Last sector, +sectors or +size{K,M,G} (104857600-209715199, default 209715199):
Using default value 209715199
Partition 4 of type Linux and of size 50 GiB is set
Command (m for help): t
Partition number (1-4, default 4): 4
Hex code (type L to list all codes): 8e
Changed type of partition 'Linux' to 'Linux LVM'
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
- 看到提示需要重启系统，执行下面命令进行重启
shutdown -r now
- 等待启动启动完成，使用
df -Th查看刚刚分区存在 sda4 这个分区，并且可以看出根目录/使用的文件系统是 xfs 文件类型的，所以使用mkfs.xfs命令进行格式化，如果你系统使用的是 ext3或ext4 文件系统，需要根据自己情况进行调整
[root@Allenwu ~]# mkfs.xfs /dev/sda4
meta-data=/dev/sda4 isize=256 agcount=4, agsize=3276800 blks
= sectsz=512 attr=2, projid32bit=l
= crc=0 finobt=0
data = bsize=4096 blocks=13107200, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=0
log =internal log bsize=4096 blocks=6400, version=2
= sectsz=512 sunit=0 blks, lazy-count=l
realtime =none extsz=4096 blocks=0, rtextents=0
- 将物理硬盘分区初始化为物理卷，以便被LVM使用，输入指令
[root@Allenwu ~]# pvcreate /dev/sda4
WARNING: xfs signature detected on /dev/sda4 at offset 0. Wipe it? [y/n]: y
Wiping xfs signature on /dev/sda4 .
Physical volume "/dev/sda4" successfully created
- 向卷组中添加物理卷来增加卷组的容量
#先查看一下卷组的名字，VG Name ： centos
[root@Allenwu ~]# vgdisplay
--- Volume group ---
VG Name centos
System ID
.......
##进行增加容量操作
[root@Allenwu ~]# vgextend centos /dev/sda4
Volume group "centos" successfully extended
- 再进行查看vg组信息，有一块空间是 Free
[root@Allenwu ~]# vgex
vgexport vgextend
[root@Allenwu ~]# vgdisplay
--- Volume group ---
VG Name centos
System ID
Format lvm2
Metadata Areas 3
Metadata Sequence No 7
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 2
Open LV 2
Max PV 0
Cur PV 3
Act PV 3
VG Size 99.50 GiB
PE Size 4.00 MiB
Total PE 25472
Alloc PE / Size 12408 / 48.47 GiB
Free PE / Size 13064 / 51.03 GiB
VG UUID cUaGz1-pvaD-Bymp-t7ot-NC87-Eyb6-e4S73r
- 执行扩展命令 lvextend -L+49G /dev/mapper/centos-root /dev/sda4
[root@Allenwu ~]# lvextend -L+49G /dev/mapper/centos-root /dev/sda4
Size of logical volume centos/root changed from 46.47 GiB （11896 extents） to 95.47 GiB (24440 extents)
Logical volume root successfully resized
- 做了那么多步骤，使用命令 e2fsck 进行检查一下文件系统
[root@Allenwu ~]# e2fsck -a /dev/mapper/centos-root
- 前面的步骤都弄好无误后，现在需要进行增大硬盘，使用命令 xfs_growfs 命令可以来增大或者收缩未加载的
xfs文件系统大小
[root@Allenwu ~]# xfs_growfs /dev/mapper/centos-root
注意：如果你系统使用文件系统是ext2、ext3、ext4，需要把 xfs_growfs 换成 resize2fs
- 查看现在硬盘大小，发现已经成功增加了硬盘
[root@Allenwu ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/centos-root xfs 96G 918M 95G 1% /
devtmpfs devtmpfs 481M 0 481M 0% /dev
tmpfs tmpfs 490M 0 490M 0% /dev/shm
tmpfs tmpfs 490M 6.6M 484M 2% /run
tmpfs tmpfs 490M 0 490M 0% /sys/fs/cgroup
/dev/sda1 xfs 497M 120M 378M 25% /boot
- 以上所有环节弄完以后，代表你已经成功扩大了根分区硬盘容量，你需要检查的是 /etc/fstab 挂载硬盘配置正不正确等问题，如果服务器没在跑业务，建议进行重启确保重启后能够正常进行运行
