Debug文件
当debug（调试）标签设置为TRUE时，将在以下文件夹中生成调试文件。
{Installed device（安装的设备）}:￥EXA￥User\Data{Controller name（控制器名称）}.DBG
启动“SmocDebugViewer.exe XML”查看器并将上述DBG文件拖动到打开的窗口上后，可以轻松查看debug文件。 以下是debug文件的示例。
新计算函数的调试文件如下：
{Installed device（安装的设备）}:￥EXA\Program\CalcEngDebug.txt
安装的设备变成如下：
R3.06及以前[指定驱动器：¥¥]
R4.01 [指定驱动器：] \ Program Files \ YOKOGAWA \ IA \ iPCS \ Products
R4.02 [指定驱动器：¥¥]
B6 概述
概述向操作员和工程师简要介绍关键操作变量。为了管理大型控制结构，所有面板均以树状图的格式显示。操作员和工程师可以直接选择要显示的数据用于监视和诊断。
查看
条目说明
通过单击控制面板上的控制器名称显示概述。
在概述视图中，每个MV，DV，POV，CV，EF变量均显示了选定的项目。
子控制器按钮
通过点击“sub-controller（子控制器）”图标，两种类型的显示模式被交替选中。在子控制器模式下，MV，CV，DV和POV变量按照子控制器的顺序排列。在priority（优先级）模式下，MV，CV，DV和POV变量按优先级排列，可通过离线PCTP定义。
“Overview（概述）”面板上显示的参数如下所述。显示的数据可从每个MV / CV / DV / POV面板中选择，以下是默认设置。
|条目| 描述 |操作员模式 |工程师模式|
| ------------- |:-------------:| -----:|
|MV
|MV No. |MV数目。| R| R|
|Tag Name （位号名） |MV位号名。 | R | R|
|Tag Comment| 位号注释。| R | R|
|Measurement （测量值） |DCS控制器中属于MV的PV值。| R | R|
|Output（输出）| DCS控制器的远程输出SV值。| R |R|
|Setpoint Readback（设定点回读）| DCS控制器中属于MV的SV值。 |R| R|
|Remote/Local（远程/本地） |REMOTE – 将输出写到DCS位号。 LOCAL– 不将输出发送到连接的DCS位号。 |R | R|
|Set Point High Limit（设定点高限）| MV设定点高限。| R/W| R/W|
|Set Point Low Limit（设定点低限）| MV设定点低限。 |R/W |R/W|
|Calc High Limit（计算高限） |计算MV设定点高限。 |R |R|
|Calc Low Limit（计算低限） |计算MV设定点低限。| R |R|
|SP High Entry Limit（SP输入高限）| SP输入高限： SETPOINT HIGH LIMIT <= SP HIGH Entry Limit，SP HIGH Entry Limit >= SP LOW Entry Limit| R| R|
|SP Low Entry Limit（SP输入低限）| SP Low Entry Limit： SETPOINT LOW LIMIT >= SP LOW Entry Limit，SP HIGH Entry Limit >= SP LOW Entry Limit| R |R|
原文：
Debug file
When the debug flag is set TRUE, the debug file is generated on the following folder.
{Installed device}:￥EXA￥User\Data{Controller name}.DBG
After starting “SmocDebugViewer.exe XML” viewer and dragging the above DBG file on the window opened, you can see the debug file easily. Following is a sample of debug file.
The debug file for a new calculation function is as follows:
{Installed device}:￥EXA\Program\CalcEngDebug.txt
Install device becomes as follows:
R3.06 and before [Specified drive:￥￥]
R4.01 [Specified drive:]\Program Files\YOKOGAWA\IA\iPCS\Products
R4.02 [Specified drive:￥￥]
B6. Overview
Overview gives a brief summary to operators and engineers about the key operating variables. In order to cope with a large control structure, all the panels are displayed in the tree view format. Operators and engineers can directly select the data to be displayed for monitoring and diagnosis purpose.
View
Description of Items
Overview is displayed by clicking the controller name on the control panel.
On the Overview view, selected items are displayed for each MV, DV, POV, CV, EF variable.
Sub controller button
By clicking ‘sub-controller’ icon, two type of display mode is selected alternatively. In the sub controller mode, MV, CV, DV and POV variables are arranged in the order of sub controller. In the priority mode, MV, CV, DV and POV variables are arranged in the priority order, which is defined on PCTP offline.
Parameters displayed on the Overview panel are described below. As the display data is selectable from each MV/CV/DV/POV panel, the following is the default setting.
|Item| Description| Operator mode| Engineer mode|
| ------------- |:-------------:| -----:|
|MV
|MV No. |MV number | R| R|
|Tag Name | MV Tag Name | R |R|
|Tag Comment |Tag comment |R |R|
|Measurement |PV value of DCS controller the MV belongs to. | R | R|
|Output| Remote output SV value for DCS controller. |R | R|
|Setpoint Readback |SV value of DCS controller to which the MV belongs. |R |R|
|Remote/Local| REMOTE – send output to DCS tag. LOCAL – doesn’t send output to the connected DCS tag. |R | R|
|Set Point High Limit| MV Set point high limit setting. |R/W | R/W|
|Set Point Low Limit |MV Set point low limit setting. |R/W |R/W|
|Calc High Limit |Calculated high set point limit of the MV| R |R|
|Calc Low Limit| Calculated low set point limit of the MV |R |R|
|SP High Entry Limit |SP High Entry Limit： SETPOINT HIGH LIMIT <= SP HIGH Entry Limit，SP HIGH Entry Limit >= SP LOW Entry Limit |R |R|
|SP Low Entry Limit |SP Low Entry Limit： SETPOINT LOW LIMIT >= SP LOW Entry Limit，SP HIGH Entry Limit >= SP LOW Entry Limit |R| R|
2017.1.5
