那么今天我们继续来深入学习View的绘制流程，接着上次的View绘制开始，同样使用的是Android 7.1源码。
1、回顾addView方法
上篇文章从addView方法一路分析到了performTraversals()方法，这个方法非常长，内部逻辑也很复杂，但是主体逻辑很清晰。主要调用了performMeasure方法、performLayout方法和performDraw方法：
private void performTraversals() {
// cache mView since it is used so much below...
final View host = mView;
if (DBG) {
System.out.println("======================================");
System.out.println("performTraversals");
host.debug();
}
if (host == null || !mAdded)
return;
mIsInTraversal = true;
mWillDrawSoon = true;
boolean windowSizeMayChange = false;
boolean newSurface = false;
boolean surfaceChanged = false;
WindowManager.LayoutParams lp = mWindowAttributes;
int desiredWindowWidth;
int desiredWindowHeight;
final int viewVisibility = getHostVisibility();
final boolean viewVisibilityChanged = !mFirst
&& (mViewVisibility != viewVisibility || mNewSurfaceNeeded);
final boolean viewUserVisibilityChanged = !mFirst &&
((mViewVisibility == View.VISIBLE) != (viewVisibility == View.VISIBLE));
WindowManager.LayoutParams params = null;
if (mWindowAttributesChanged) {
mWindowAttributesChanged = false;
surfaceChanged = true;
params = lp;
}
CompatibilityInfo compatibilityInfo =
mDisplay.getDisplayAdjustments().getCompatibilityInfo();
if (compatibilityInfo.supportsScreen() == mLastInCompatMode) {
params = lp;
mFullRedrawNeeded = true;
mLayoutRequested = true;
if (mLastInCompatMode) {
params.privateFlags &= ~WindowManager.LayoutParams.PRIVATE_FLAG_COMPATIBLE_WINDOW;
mLastInCompatMode = false;
} else {
params.privateFlags |= WindowManager.LayoutParams.PRIVATE_FLAG_COMPATIBLE_WINDOW;
mLastInCompatMode = true;
}
}
mWindowAttributesChangesFlag = 0;
Rect frame = mWinFrame;
if (mFirst) {
mFullRedrawNeeded = true;
mLayoutRequested = true;
if (shouldUseDisplaySize(lp)) {
// NOTE -- system code, won't try to do compat mode.
Point size = new Point();
mDisplay.getRealSize(size);
desiredWindowWidth = size.x;
desiredWindowHeight = size.y;
} else {
Configuration config = mContext.getResources().getConfiguration();
desiredWindowWidth = dipToPx(config.screenWidthDp);
desiredWindowHeight = dipToPx(config.screenHeightDp);
}
// We used to use the following condition to choose 32 bits drawing caches:
// PixelFormat.hasAlpha(lp.format) || lp.format == PixelFormat.RGBX_8888
// However, windows are now always 32 bits by default, so choose 32 bits
mAttachInfo.mUse32BitDrawingCache = true;
mAttachInfo.mHasWindowFocus = false;
mAttachInfo.mWindowVisibility = viewVisibility;
mAttachInfo.mRecomputeGlobalAttributes = false;
mLastConfiguration.setTo(host.getResources().getConfiguration());
mLastSystemUiVisibility = mAttachInfo.mSystemUiVisibility;
// Set the layout direction if it has not been set before (inherit is the default)
if (mViewLayoutDirectionInitial == View.LAYOUT_DIRECTION_INHERIT) {
host.setLayoutDirection(mLastConfiguration.getLayoutDirection());
}
host.dispatchAttachedToWindow(mAttachInfo, 0);
mAttachInfo.mTreeObserver.dispatchOnWindowAttachedChange(true);
dispatchApplyInsets(host);
//Log.i(mTag, "Screen on initialized: " + attachInfo.mKeepScreenOn);
} else {
desiredWindowWidth = frame.width();
desiredWindowHeight = frame.height();
if (desiredWindowWidth != mWidth || desiredWindowHeight != mHeight) {
if (DEBUG_ORIENTATION) Log.v(mTag, "View " + host + " resized to: " + frame);
mFullRedrawNeeded = true;
mLayoutRequested = true;
windowSizeMayChange = true;
}
}
if (viewVisibilityChanged) {
mAttachInfo.mWindowVisibility = viewVisibility;
host.dispatchWindowVisibilityChanged(viewVisibility);
if (viewUserVisibilityChanged) {
host.dispatchVisibilityAggregated(viewVisibility == View.VISIBLE);
}
if (viewVisibility != View.VISIBLE || mNewSurfaceNeeded) {
endDragResizing();
destroyHardwareResources();
}
if (viewVisibility == View.GONE) {
// After making a window gone, we will count it as being
// shown for the first time the next time it gets focus.
mHasHadWindowFocus = false;
}
}
// Non-visible windows can't hold accessibility focus.
if (mAttachInfo.mWindowVisibility != View.VISIBLE) {
host.clearAccessibilityFocus();
}
// Execute enqueued actions on every traversal in case a detached view enqueued an action
getRunQueue().executeActions(mAttachInfo.mHandler);
boolean insetsChanged = false;
boolean layoutRequested = mLayoutRequested && (!mStopped || mReportNextDraw);
if (layoutRequested) {
final Resources res = mView.getContext().getResources();
if (mFirst) {
// make sure touch mode code executes by setting cached value
// to opposite of the added touch mode.
mAttachInfo.mInTouchMode = !mAddedTouchMode;
ensureTouchModeLocally(mAddedTouchMode);
} else {
if (!mPendingOverscanInsets.equals(mAttachInfo.mOverscanInsets)) {
insetsChanged = true;
}
if (!mPendingContentInsets.equals(mAttachInfo.mContentInsets)) {
insetsChanged = true;
}
if (!mPendingStableInsets.equals(mAttachInfo.mStableInsets)) {
insetsChanged = true;
}
if (!mPendingVisibleInsets.equals(mAttachInfo.mVisibleInsets)) {
mAttachInfo.mVisibleInsets.set(mPendingVisibleInsets);
if (DEBUG_LAYOUT) Log.v(mTag, "Visible insets changing to: "
+ mAttachInfo.mVisibleInsets);
}
if (!mPendingOutsets.equals(mAttachInfo.mOutsets)) {
insetsChanged = true;
}
if (mPendingAlwaysConsumeNavBar != mAttachInfo.mAlwaysConsumeNavBar) {
insetsChanged = true;
}
if (lp.width == ViewGroup.LayoutParams.WRAP_CONTENT
|| lp.height == ViewGroup.LayoutParams.WRAP_CONTENT) {
windowSizeMayChange = true;
if (shouldUseDisplaySize(lp)) {
// NOTE -- system code, won't try to do compat mode.
Point size = new Point();
mDisplay.getRealSize(size);
desiredWindowWidth = size.x;
desiredWindowHeight = size.y;
} else {
Configuration config = res.getConfiguration();
desiredWindowWidth = dipToPx(config.screenWidthDp);
desiredWindowHeight = dipToPx(config.screenHeightDp);
}
}
}
// Ask host how big it wants to be
windowSizeMayChange |= measureHierarchy(host, lp, res,
desiredWindowWidth, desiredWindowHeight);
}
if (collectViewAttributes()) {
params = lp;
}
if (mAttachInfo.mForceReportNewAttributes) {
mAttachInfo.mForceReportNewAttributes = false;
params = lp;
}
if (mFirst || mAttachInfo.mViewVisibilityChanged) {
mAttachInfo.mViewVisibilityChanged = false;
int resizeMode = mSoftInputMode &
WindowManager.LayoutParams.SOFT_INPUT_MASK_ADJUST;
// If we are in auto resize mode, then we need to determine
// what mode to use now.
if (resizeMode == WindowManager.LayoutParams.SOFT_INPUT_ADJUST_UNSPECIFIED) {
final int N = mAttachInfo.mScrollContainers.size();
for (int i=0; i<N; i++) {
if (mAttachInfo.mScrollContainers.get(i).isShown()) {
resizeMode = WindowManager.LayoutParams.SOFT_INPUT_ADJUST_RESIZE;
}
}
if (resizeMode == 0) {
resizeMode = WindowManager.LayoutParams.SOFT_INPUT_ADJUST_PAN;
}
if ((lp.softInputMode &
WindowManager.LayoutParams.SOFT_INPUT_MASK_ADJUST) != resizeMode) {
lp.softInputMode = (lp.softInputMode &
~WindowManager.LayoutParams.SOFT_INPUT_MASK_ADJUST) |
resizeMode;
params = lp;
}
}
}
if (params != null) {
if ((host.mPrivateFlags & View.PFLAG_REQUEST_TRANSPARENT_REGIONS) != 0) {
if (!PixelFormat.formatHasAlpha(params.format)) {
params.format = PixelFormat.TRANSLUCENT;
}
}
mAttachInfo.mOverscanRequested = (params.flags
& WindowManager.LayoutParams.FLAG_LAYOUT_IN_OVERSCAN) != 0;
}
if (mApplyInsetsRequested) {
mApplyInsetsRequested = false;
mLastOverscanRequested = mAttachInfo.mOverscanRequested;
dispatchApplyInsets(host);
if (mLayoutRequested) {
// Short-circuit catching a new layout request here, so
// we don't need to go through two layout passes when things
// change due to fitting system windows, which can happen a lot.
windowSizeMayChange |= measureHierarchy(host, lp,
mView.getContext().getResources(),
desiredWindowWidth, desiredWindowHeight);
}
}
if (layoutRequested) {
// Clear this now, so that if anything requests a layout in the
// rest of this function we will catch it and re-run a full
// layout pass.
mLayoutRequested = false;
}
boolean windowShouldResize = layoutRequested && windowSizeMayChange
&& ((mWidth != host.getMeasuredWidth() || mHeight != host.getMeasuredHeight())
|| (lp.width == ViewGroup.LayoutParams.WRAP_CONTENT &&
frame.width() < desiredWindowWidth && frame.width() != mWidth)
|| (lp.height == ViewGroup.LayoutParams.WRAP_CONTENT &&
frame.height() < desiredWindowHeight && frame.height() != mHeight));
windowShouldResize |= mDragResizing && mResizeMode == RESIZE_MODE_FREEFORM;
// If the activity was just relaunched, it might have unfrozen the task bounds (while
// relaunching), so we need to force a call into window manager to pick up the latest
// bounds.
windowShouldResize |= mActivityRelaunched;
// Determine whether to compute insets.
// If there are no inset listeners remaining then we may still need to compute
// insets in case the old insets were non-empty and must be reset.
final boolean computesInternalInsets =
mAttachInfo.mTreeObserver.hasComputeInternalInsetsListeners()
|| mAttachInfo.mHasNonEmptyGivenInternalInsets;
boolean insetsPending = false;
int relayoutResult = 0;
boolean updatedConfiguration = false;
final int surfaceGenerationId = mSurface.getGenerationId();
final boolean isViewVisible = viewVisibility == View.VISIBLE;
if (mFirst || windowShouldResize || insetsChanged ||
viewVisibilityChanged || params != null || mForceNextWindowRelayout) {
mForceNextWindowRelayout = false;
if (isViewVisible) {
// If this window is giving internal insets to the window
// manager, and it is being added or changing its visibility,
// then we want to first give the window manager "fake"
// insets to cause it to effectively ignore the content of
// the window during layout. This avoids it briefly causing
// other windows to resize/move based on the raw frame of the
// window, waiting until we can finish laying out this window
// and get back to the window manager with the ultimately
// computed insets.
insetsPending = computesInternalInsets && (mFirst || viewVisibilityChanged);
}
if (mSurfaceHolder != null) {
mSurfaceHolder.mSurfaceLock.lock();
mDrawingAllowed = true;
}
boolean hwInitialized = false;
boolean contentInsetsChanged = false;
boolean hadSurface = mSurface.isValid();
try {
if (DEBUG_LAYOUT) {
Log.i(mTag, "host=w:" + host.getMeasuredWidth() + ", h:" +
host.getMeasuredHeight() + ", params=" + params);
}
if (mAttachInfo.mHardwareRenderer != null) {
// relayoutWindow may decide to destroy mSurface. As that decision
// happens in WindowManager service, we need to be defensive here
// and stop using the surface in case it gets destroyed.
if (mAttachInfo.mHardwareRenderer.pauseSurface(mSurface)) {
// Animations were running so we need to push a frame
// to resume them
mDirty.set(0, 0, mWidth, mHeight);
}
mChoreographer.mFrameInfo.addFlags(FrameInfo.FLAG_WINDOW_LAYOUT_CHANGED);
}
relayoutResult = relayoutWindow(params, viewVisibility, insetsPending);
if (DEBUG_LAYOUT) Log.v(mTag, "relayout: frame=" + frame.toShortString()
+ " overscan=" + mPendingOverscanInsets.toShortString()
+ " content=" + mPendingContentInsets.toShortString()
+ " visible=" + mPendingVisibleInsets.toShortString()
+ " visible=" + mPendingStableInsets.toShortString()
+ " outsets=" + mPendingOutsets.toShortString()
+ " surface=" + mSurface);
if (mPendingConfiguration.seq != 0) {
if (DEBUG_CONFIGURATION) Log.v(mTag, "Visible with new config: "
+ mPendingConfiguration);
updateConfiguration(new Configuration(mPendingConfiguration), !mFirst);
mPendingConfiguration.seq = 0;
updatedConfiguration = true;
}
final boolean overscanInsetsChanged = !mPendingOverscanInsets.equals(
mAttachInfo.mOverscanInsets);
contentInsetsChanged = !mPendingContentInsets.equals(
mAttachInfo.mContentInsets);
final boolean visibleInsetsChanged = !mPendingVisibleInsets.equals(
mAttachInfo.mVisibleInsets);
final boolean stableInsetsChanged = !mPendingStableInsets.equals(
mAttachInfo.mStableInsets);
final boolean outsetsChanged = !mPendingOutsets.equals(mAttachInfo.mOutsets);
final boolean surfaceSizeChanged = (relayoutResult
& WindowManagerGlobal.RELAYOUT_RES_SURFACE_RESIZED) != 0;
final boolean alwaysConsumeNavBarChanged =
mPendingAlwaysConsumeNavBar != mAttachInfo.mAlwaysConsumeNavBar;
if (contentInsetsChanged) {
mAttachInfo.mContentInsets.set(mPendingContentInsets);
if (DEBUG_LAYOUT) Log.v(mTag, "Content insets changing to: "
+ mAttachInfo.mContentInsets);
}
if (overscanInsetsChanged) {
mAttachInfo.mOverscanInsets.set(mPendingOverscanInsets);
if (DEBUG_LAYOUT) Log.v(mTag, "Overscan insets changing to: "
+ mAttachInfo.mOverscanInsets);
// Need to relayout with content insets.
contentInsetsChanged = true;
}
if (stableInsetsChanged) {
mAttachInfo.mStableInsets.set(mPendingStableInsets);
if (DEBUG_LAYOUT) Log.v(mTag, "Decor insets changing to: "
+ mAttachInfo.mStableInsets);
// Need to relayout with content insets.
contentInsetsChanged = true;
}
if (alwaysConsumeNavBarChanged) {
mAttachInfo.mAlwaysConsumeNavBar = mPendingAlwaysConsumeNavBar;
contentInsetsChanged = true;
}
if (contentInsetsChanged || mLastSystemUiVisibility !=
mAttachInfo.mSystemUiVisibility || mApplyInsetsRequested
|| mLastOverscanRequested != mAttachInfo.mOverscanRequested
|| outsetsChanged) {
mLastSystemUiVisibility = mAttachInfo.mSystemUiVisibility;
mLastOverscanRequested = mAttachInfo.mOverscanRequested;
mAttachInfo.mOutsets.set(mPendingOutsets);
mApplyInsetsRequested = false;
dispatchApplyInsets(host);
}
if (visibleInsetsChanged) {
mAttachInfo.mVisibleInsets.set(mPendingVisibleInsets);
if (DEBUG_LAYOUT) Log.v(mTag, "Visible insets changing to: "
+ mAttachInfo.mVisibleInsets);
}
if (!hadSurface) {
if (mSurface.isValid()) {
// If we are creating a new surface, then we need to
// completely redraw it. Also, when we get to the
// point of drawing it we will hold off and schedule
// a new traversal instead. This is so we can tell the
// window manager about all of the windows being displayed
// before actually drawing them, so it can display then
// all at once.
newSurface = true;
mFullRedrawNeeded = true;
mPreviousTransparentRegion.setEmpty();
// Only initialize up-front if transparent regions are not
// requested, otherwise defer to see if the entire window
// will be transparent
if (mAttachInfo.mHardwareRenderer != null) {
try {
hwInitialized = mAttachInfo.mHardwareRenderer.initialize(
mSurface);
if (hwInitialized && (host.mPrivateFlags
& View.PFLAG_REQUEST_TRANSPARENT_REGIONS) == 0) {
// Don't pre-allocate if transparent regions
// are requested as they may not be needed
mSurface.allocateBuffers();
}
} catch (OutOfResourcesException e) {
handleOutOfResourcesException(e);
return;
}
}
}
} else if (!mSurface.isValid()) {
// If the surface has been removed, then reset the scroll
// positions.
if (mLastScrolledFocus != null) {
mLastScrolledFocus.clear();
}
mScrollY = mCurScrollY = 0;
if (mView instanceof RootViewSurfaceTaker) {
((RootViewSurfaceTaker) mView).onRootViewScrollYChanged(mCurScrollY);
}
if (mScroller != null) {
mScroller.abortAnimation();
}
// Our surface is gone
if (mAttachInfo.mHardwareRenderer != null &&
mAttachInfo.mHardwareRenderer.isEnabled()) {
mAttachInfo.mHardwareRenderer.destroy();
}
} else if ((surfaceGenerationId != mSurface.getGenerationId()
|| surfaceSizeChanged)
&& mSurfaceHolder == null
&& mAttachInfo.mHardwareRenderer != null) {
mFullRedrawNeeded = true;
try {
// Need to do updateSurface (which leads to CanvasContext::setSurface and
// re-create the EGLSurface) if either the Surface changed (as indicated by
// generation id), or WindowManager changed the surface size. The latter is
// because on some chips, changing the consumer side's BufferQueue size may
// not take effect immediately unless we create a new EGLSurface.
// Note that frame size change doesn't always imply surface size change (eg.
// drag resizing uses fullscreen surface), need to check surfaceSizeChanged
// flag from WindowManager.
mAttachInfo.mHardwareRenderer.updateSurface(mSurface);
} catch (OutOfResourcesException e) {
handleOutOfResourcesException(e);
return;
}
}
final boolean freeformResizing = (relayoutResult
& WindowManagerGlobal.RELAYOUT_RES_DRAG_RESIZING_FREEFORM) != 0;
final boolean dockedResizing = (relayoutResult
& WindowManagerGlobal.RELAYOUT_RES_DRAG_RESIZING_DOCKED) != 0;
final boolean dragResizing = freeformResizing || dockedResizing;
if (mDragResizing != dragResizing) {
if (dragResizing) {
mResizeMode = freeformResizing
? RESIZE_MODE_FREEFORM
: RESIZE_MODE_DOCKED_DIVIDER;
startDragResizing(mPendingBackDropFrame,
mWinFrame.equals(mPendingBackDropFrame), mPendingVisibleInsets,
mPendingStableInsets, mResizeMode);
} else {
// We shouldn't come here, but if we come we should end the resize.
endDragResizing();
}
}
if (!USE_MT_RENDERER) {
if (dragResizing) {
mCanvasOffsetX = mWinFrame.left;
mCanvasOffsetY = mWinFrame.top;
} else {
mCanvasOffsetX = mCanvasOffsetY = 0;
}
}
} catch (RemoteException e) {
}
if (DEBUG_ORIENTATION) Log.v(
TAG, "Relayout returned: frame=" + frame + ", surface=" + mSurface);
mAttachInfo.mWindowLeft = frame.left;
mAttachInfo.mWindowTop = frame.top;
// !!FIXME!! This next section handles the case where we did not get the
// window size we asked for. We should avoid this by getting a maximum size from
// the window session beforehand.
if (mWidth != frame.width() || mHeight != frame.height()) {
mWidth = frame.width();
mHeight = frame.height();
}
if (mSurfaceHolder != null) {
// The app owns the surface; tell it about what is going on.
if (mSurface.isValid()) {
// XXX .copyFrom() doesn't work!
//mSurfaceHolder.mSurface.copyFrom(mSurface);
mSurfaceHolder.mSurface = mSurface;
}
mSurfaceHolder.setSurfaceFrameSize(mWidth, mHeight);
mSurfaceHolder.mSurfaceLock.unlock();
if (mSurface.isValid()) {
if (!hadSurface) {
mSurfaceHolder.ungetCallbacks();
mIsCreating = true;
mSurfaceHolderCallback.surfaceCreated(mSurfaceHolder);
SurfaceHolder.Callback callbacks[] = mSurfaceHolder.getCallbacks();
if (callbacks != null) {
for (SurfaceHolder.Callback c : callbacks) {
c.surfaceCreated(mSurfaceHolder);
}
}
surfaceChanged = true;
}
if (surfaceChanged || surfaceGenerationId != mSurface.getGenerationId()) {
mSurfaceHolderCallback.surfaceChanged(mSurfaceHolder,
lp.format, mWidth, mHeight);
SurfaceHolder.Callback callbacks[] = mSurfaceHolder.getCallbacks();
if (callbacks != null) {
for (SurfaceHolder.Callback c : callbacks) {
c.surfaceChanged(mSurfaceHolder, lp.format,
mWidth, mHeight);
}
}
}
mIsCreating = false;
} else if (hadSurface) {
mSurfaceHolder.ungetCallbacks();
SurfaceHolder.Callback callbacks[] = mSurfaceHolder.getCallbacks();
mSurfaceHolderCallback.surfaceDestroyed(mSurfaceHolder);
if (callbacks != null) {
for (SurfaceHolder.Callback c : callbacks) {
c.surfaceDestroyed(mSurfaceHolder);
}
}
mSurfaceHolder.mSurfaceLock.lock();
try {
mSurfaceHolder.mSurface = new Surface();
} finally {
mSurfaceHolder.mSurfaceLock.unlock();
}
}
}
final ThreadedRenderer hardwareRenderer = mAttachInfo.mHardwareRenderer;
if (hardwareRenderer != null && hardwareRenderer.isEnabled()) {
if (hwInitialized
|| mWidth != hardwareRenderer.getWidth()
|| mHeight != hardwareRenderer.getHeight()
|| mNeedsHwRendererSetup) {
hardwareRenderer.setup(mWidth, mHeight, mAttachInfo,
mWindowAttributes.surfaceInsets);
mNeedsHwRendererSetup = false;
}
}
if (!mStopped || mReportNextDraw) {
boolean focusChangedDueToTouchMode = ensureTouchModeLocally(
(relayoutResult&WindowManagerGlobal.RELAYOUT_RES_IN_TOUCH_MODE) != 0);
if (focusChangedDueToTouchMode || mWidth != host.getMeasuredWidth()
|| mHeight != host.getMeasuredHeight() || contentInsetsChanged ||
updatedConfiguration) {
int childWidthMeasureSpec = getRootMeasureSpec(mWidth, lp.width);
int childHeightMeasureSpec = getRootMeasureSpec(mHeight, lp.height);
if (DEBUG_LAYOUT) Log.v(mTag, "Ooops, something changed! mWidth="
+ mWidth + " measuredWidth=" + host.getMeasuredWidth()
+ " mHeight=" + mHeight
+ " measuredHeight=" + host.getMeasuredHeight()
+ " coveredInsetsChanged=" + contentInsetsChanged);
// Ask host how big it wants to be
performMeasure(childWidthMeasureSpec, childHeightMeasureSpec); // performMeasure
// Implementation of weights from WindowManager.LayoutParams
// We just grow the dimensions as needed and re-measure if
// needs be
int width = host.getMeasuredWidth();
int height = host.getMeasuredHeight();
boolean measureAgain = false;
if (lp.horizontalWeight > 0.0f) {
width += (int) ((mWidth - width) * lp.horizontalWeight);
childWidthMeasureSpec = MeasureSpec.makeMeasureSpec(width,
MeasureSpec.EXACTLY);
measureAgain = true;
}
if (lp.verticalWeight > 0.0f) {
height += (int) ((mHeight - height) * lp.verticalWeight);
childHeightMeasureSpec = MeasureSpec.makeMeasureSpec(height,
MeasureSpec.EXACTLY);
measureAgain = true;
}
if (measureAgain) {
if (DEBUG_LAYOUT) Log.v(mTag,
"And hey let's measure once more: width=" + width
+ " height=" + height);
performMeasure(childWidthMeasureSpec, childHeightMeasureSpec);
}
layoutRequested = true;
}
}
} else {
// Not the first pass and no window/insets/visibility change but the window
// may have moved and we need check that and if so to update the left and right
// in the attach info. We translate only the window frame since on window move
// the window manager tells us only for the new frame but the insets are the
// same and we do not want to translate them more than once.
maybeHandleWindowMove(frame);
}
final boolean didLayout = layoutRequested && (!mStopped || mReportNextDraw);
boolean triggerGlobalLayoutListener = didLayout
|| mAttachInfo.mRecomputeGlobalAttributes;
if (didLayout) {
performLayout(lp, mWidth, mHeight); // performLayout
// By this point all views have been sized and positioned
// We can compute the transparent area
if ((host.mPrivateFlags & View.PFLAG_REQUEST_TRANSPARENT_REGIONS) != 0) {
// start out transparent
// TODO: AVOID THAT CALL BY CACHING THE RESULT?
host.getLocationInWindow(mTmpLocation);
mTransparentRegion.set(mTmpLocation[0], mTmpLocation[1],
mTmpLocation[0] + host.mRight - host.mLeft,
mTmpLocation[1] + host.mBottom - host.mTop);
host.gatherTransparentRegion(mTransparentRegion);
if (mTranslator != null) {
mTranslator.translateRegionInWindowToScreen(mTransparentRegion);
}
if (!mTransparentRegion.equals(mPreviousTransparentRegion)) {
mPreviousTransparentRegion.set(mTransparentRegion);
mFullRedrawNeeded = true;
// reconfigure window manager
try {
mWindowSession.setTransparentRegion(mWindow, mTransparentRegion);
} catch (RemoteException e) {
}
}
}
if (DBG) {
System.out.println("======================================");
System.out.println("performTraversals -- after setFrame");
host.debug();
}
}
if (triggerGlobalLayoutListener) {
mAttachInfo.mRecomputeGlobalAttributes = false;
mAttachInfo.mTreeObserver.dispatchOnGlobalLayout();
}
if (computesInternalInsets) {
// Clear the original insets.
final ViewTreeObserver.InternalInsetsInfo insets = mAttachInfo.mGivenInternalInsets;
insets.reset();
// Compute new insets in place.
mAttachInfo.mTreeObserver.dispatchOnComputeInternalInsets(insets);
mAttachInfo.mHasNonEmptyGivenInternalInsets = !insets.isEmpty();
// Tell the window manager.
if (insetsPending || !mLastGivenInsets.equals(insets)) {
mLastGivenInsets.set(insets);
// Translate insets to screen coordinates if needed.
final Rect contentInsets;
final Rect visibleInsets;
final Region touchableRegion;
if (mTranslator != null) {
contentInsets = mTranslator.getTranslatedContentInsets(insets.contentInsets);
visibleInsets = mTranslator.getTranslatedVisibleInsets(insets.visibleInsets);
touchableRegion = mTranslator.getTranslatedTouchableArea(insets.touchableRegion);
} else {
contentInsets = insets.contentInsets;
visibleInsets = insets.visibleInsets;
touchableRegion = insets.touchableRegion;
}
try {
mWindowSession.setInsets(mWindow, insets.mTouchableInsets,
contentInsets, visibleInsets, touchableRegion);
} catch (RemoteException e) {
}
}
}
if (mFirst) {
// handle first focus request
if (DEBUG_INPUT_RESIZE) Log.v(mTag, "First: mView.hasFocus()="
+ mView.hasFocus());
if (mView != null) {
if (!mView.hasFocus()) {
mView.requestFocus(View.FOCUS_FORWARD);
if (DEBUG_INPUT_RESIZE) Log.v(mTag, "First: requested focused view="
+ mView.findFocus());
} else {
if (DEBUG_INPUT_RESIZE) Log.v(mTag, "First: existing focused view="
+ mView.findFocus());
}
}
}
final boolean changedVisibility = (viewVisibilityChanged || mFirst) && isViewVisible;
final boolean hasWindowFocus = mAttachInfo.mHasWindowFocus && isViewVisible;
final boolean regainedFocus = hasWindowFocus && mLostWindowFocus;
if (regainedFocus) {
mLostWindowFocus = false;
} else if (!hasWindowFocus && mHadWindowFocus) {
mLostWindowFocus = true;
}
if (changedVisibility || regainedFocus) {
// Toasts are presented as notifications - don't present them as windows as well
boolean isToast = (mWindowAttributes == null) ? false
: (mWindowAttributes.type == WindowManager.LayoutParams.TYPE_TOAST);
if (!isToast) {
host.sendAccessibilityEvent(AccessibilityEvent.TYPE_WINDOW_STATE_CHANGED);
}
}
mFirst = false;
mWillDrawSoon = false;
mNewSurfaceNeeded = false;
mActivityRelaunched = false;
mViewVisibility = viewVisibility;
mHadWindowFocus = hasWindowFocus;
if (hasWindowFocus && !isInLocalFocusMode()) {
final boolean imTarget = WindowManager.LayoutParams
.mayUseInputMethod(mWindowAttributes.flags);
if (imTarget != mLastWasImTarget) {
mLastWasImTarget = imTarget;
InputMethodManager imm = InputMethodManager.peekInstance();
if (imm != null && imTarget) {
imm.onPreWindowFocus(mView, hasWindowFocus);
imm.onPostWindowFocus(mView, mView.findFocus(),
mWindowAttributes.softInputMode,
!mHasHadWindowFocus, mWindowAttributes.flags);
}
}
}
// Remember if we must report the next draw.
if ((relayoutResult & WindowManagerGlobal.RELAYOUT_RES_FIRST_TIME) != 0) {
mReportNextDraw = true;
}
boolean cancelDraw = mAttachInfo.mTreeObserver.dispatchOnPreDraw() || !isViewVisible;
if (!cancelDraw && !newSurface) {
if (mPendingTransitions != null && mPendingTransitions.size() > 0) {
for (int i = 0; i < mPendingTransitions.size(); ++i) {
mPendingTransitions.get(i).startChangingAnimations();
}
mPendingTransitions.clear();
}
performDraw(); // performDraw
} else {
if (isViewVisible) {
// Try again
scheduleTraversals();
} else if (mPendingTransitions != null && mPendingTransitions.size() > 0) {
for (int i = 0; i < mPendingTransitions.size(); ++i) {
mPendingTransitions.get(i).endChangingAnimations();
}
mPendingTransitions.clear();
}
}
mIsInTraversal = false;
}
其执行的过程可简单的概括为：是否需要重新计算视图的大小(measure)、是否需要重新布局视图的位置(layout)，以及是否需要重绘（Draw），也就是我们常说的View的绘制流程。
那么接下来我们一同来详细分析一下。
2、performMeasure
调用performMeasure之前会先调用getRootMeasureSpec方法，通过getRootMeasureSpec方法获得顶层视图DecorView的测量规格。
/**
* Figures out the measure spec for the root view in a window based on it's
* layout params.
*
* @param windowSize
* The available width or height of the window
*
* @param rootDimension
* The layout params for one dimension (width or height) of the
* window.
*
* @return The measure spec to use to measure the root view.
*/
private static int getRootMeasureSpec(int windowSize, int rootDimension) {
int measureSpec;
switch (rootDimension) {
case ViewGroup.LayoutParams.MATCH_PARENT:
// Window can't resize. Force root view to be windowSize.
measureSpec = MeasureSpec.makeMeasureSpec(windowSize, MeasureSpec.EXACTLY);
break;
case ViewGroup.LayoutParams.WRAP_CONTENT:
// Window can resize. Set max size for root view.
measureSpec = MeasureSpec.makeMeasureSpec(windowSize, MeasureSpec.AT_MOST);
break;
default:
// Window wants to be an exact size. Force root view to be that size.
measureSpec = MeasureSpec.makeMeasureSpec(rootDimension, MeasureSpec.EXACTLY);
break;
}
return measureSpec;
}
该方法主要作用是在整个窗口的基础上计算出root view（顶层视图DecorView）的测量规格。传入的两个参数分别指：windowSize是当前手机窗口的有效宽和高，一般都是除了通知栏的屏幕宽和高；rootDimension是根布局DecorView请求的宽和高，DecorView根布局宽和高都是MATCH_PARENT。
当匹配父容器时，测量模式为MeasureSpec.EXACTLY，测量大小直接为屏幕的大小，也就是充满真个屏幕；
当包裹内容时，测量模式为MeasureSpec.AT_MOST，测量大小直接为屏幕大小，也就是充满真个屏幕；
其他情况时，测量模式为MeasureSpec.EXACTLY，测量大小为DecorView顶层视图布局设置的大小。
因此DecorView根布局的测量模式就是MeasureSpec.EXACTLY，测量大小一般都是整个屏幕大小，所以一般我们的Activity窗口都是全屏的。所以上面代码走第一个分支，然后通过调用MeasureSpec.makeMeasureSpec方法将DecorView的测量模式和测量大小封装成DecorView的测量规格。
回到performTraversals方法，直接来看调用的performMeasure方法：
private void performMeasure(int childWidthMeasureSpec, int childHeightMeasureSpec) {
Trace.traceBegin(Trace.TRACE_TAG_VIEW, "measure");
try {
mView.measure(childWidthMeasureSpec, childHeightMeasureSpec);
} finally {
Trace.traceEnd(Trace.TRACE_TAG_VIEW);
}
}
该方法调用了mView的measure()方法。其中mView是一个View对象，在ViewRootImpl类中的mView是整个UI的根节点，实际上也就是PhoneWindow中的mDecor对象，即一个Activity所对应的一个屏幕（不包括顶部的系统状态条）中的视图，包括可能存在也可能不存在的ActionBar。
继续深入查看View的measure方法：
/**
* <p>
* This is called to find out how big a view should be. The parent
* supplies constraint information in the width and height parameters.
* </p>
*
* <p>
* The actual measurement work of a view is performed in
* {@link #onMeasure(int, int)}, called by this method. Therefore, only
* {@link #onMeasure(int, int)} can and must be overridden by subclasses.
* </p>
*
*
* @param widthMeasureSpec Horizontal space requirements as imposed by the
* parent
* @param heightMeasureSpec Vertical space requirements as imposed by the
* parent
*
* @see #onMeasure(int, int)
*/
public final void measure(int widthMeasureSpec, int heightMeasureSpec) {
boolean optical = isLayoutModeOptical(this);
if (optical != isLayoutModeOptical(mParent)) {
Insets insets = getOpticalInsets();
int oWidth = insets.left + insets.right;
int oHeight = insets.top + insets.bottom;
widthMeasureSpec = MeasureSpec.adjust(widthMeasureSpec, optical ? -oWidth : oWidth);
heightMeasureSpec = MeasureSpec.adjust(heightMeasureSpec, optical ? -oHeight : oHeight);
}
// Suppress sign extension for the low bytes
long key = (long) widthMeasureSpec << 32 | (long) heightMeasureSpec & 0xffffffffL;
if (mMeasureCache == null) mMeasureCache = new LongSparseLongArray(2);
final boolean forceLayout = (mPrivateFlags & PFLAG_FORCE_LAYOUT) == PFLAG_FORCE_LAYOUT;
// Optimize layout by avoiding an extra EXACTLY pass when the view is
// already measured as the correct size. In API 23 and below, this
// extra pass is required to make LinearLayout re-distribute weight.
final boolean specChanged = widthMeasureSpec != mOldWidthMeasureSpec
|| heightMeasureSpec != mOldHeightMeasureSpec;
final boolean isSpecExactly = MeasureSpec.getMode(widthMeasureSpec) == MeasureSpec.EXACTLY
&& MeasureSpec.getMode(heightMeasureSpec) == MeasureSpec.EXACTLY;
final boolean matchesSpecSize = getMeasuredWidth() == MeasureSpec.getSize(widthMeasureSpec)
&& getMeasuredHeight() == MeasureSpec.getSize(heightMeasureSpec);
final boolean needsLayout = specChanged
&& (sAlwaysRemeasureExactly || !isSpecExactly || !matchesSpecSize);
if (forceLayout || needsLayout) {
// first clears the measured dimension flag
mPrivateFlags &= ~PFLAG_MEASURED_DIMENSION_SET;
resolveRtlPropertiesIfNeeded();
int cacheIndex = forceLayout ? -1 : mMeasureCache.indexOfKey(key);
if (cacheIndex < 0 || sIgnoreMeasureCache) {
// measure ourselves, this should set the measured dimension flag back
onMeasure(widthMeasureSpec, heightMeasureSpec); // onMeasure
mPrivateFlags3 &= ~PFLAG3_MEASURE_NEEDED_BEFORE_LAYOUT;
} else {
long value = mMeasureCache.valueAt(cacheIndex);
// Casting a long to int drops the high 32 bits, no mask needed
setMeasuredDimensionRaw((int) (value >> 32), (int) value);
mPrivateFlags3 |= PFLAG3_MEASURE_NEEDED_BEFORE_LAYOUT;
}
// flag not set, setMeasuredDimension() was not invoked, we raise
// an exception to warn the developer
if ((mPrivateFlags & PFLAG_MEASURED_DIMENSION_SET) != PFLAG_MEASURED_DIMENSION_SET) {
throw new IllegalStateException("View with id " + getId() + ": "
+ getClass().getName() + "#onMeasure() did not set the"
+ " measured dimension by calling"
+ " setMeasuredDimension()");
}
mPrivateFlags |= PFLAG_LAYOUT_REQUIRED;
}
mOldWidthMeasureSpec = widthMeasureSpec;
mOldHeightMeasureSpec = heightMeasureSpec;
mMeasureCache.put(key, ((long) mMeasuredWidth) << 32 |
(long) mMeasuredHeight & 0xffffffffL); // suppress sign extension
}
参数widthMeasureSpec和heightMeasureSpec用来描述当前正在处理的视图可以获得的最大宽度和高度。
当ViewRoot类的成员变量mPrivateFlags的FORCE_LAYOUT位不等于0时，就表示当前视图正在请求执行一次布局操作，这时候方法就需要重新测量当前视图的宽度和高度。此外，当参数widthMeasureSpec和heightMeasureSpec的值不等于ViewRoot类的成员变量mldWidthMeasureSpec和mOldHeightMeasureSpec的值时，就表示当前视图上一次可以获得的最大宽度和高度已经失效了，这时候函数也需要重新测量当前视图的宽度和高度。
当View类的measure方法决定要重新测量当前视图的宽度和高度之后，它就会首先将成员变量mPrivateFlags的MEASURED_DIMENSION_SET位设置为0，接着再调用onMeasure方法来真正执行测量宽度和高度的操作。View类的onMeasure方法执行完成之后，需要再调用setMeasuredDimension方法来将测量好的宽度和高度设置到View类的成员变量mMeasuredWidth和mMeasuredHeight中，并且将成员变量mPrivateFlags的EASURED_DIMENSION_SET位设置为1。这个操作是强制的，因为当前视图最终就是通过View类的成员变量mMeasuredWidth和mMeasuredHeight来获得它的宽度和高度的。
继续查看View类的onMeasure()方法：
/**
* <p>
* Measure the view and its content to determine the measured width and the
* measured height. This method is invoked by {@link #measure(int, int)} and
* should be overridden by subclasses to provide accurate and efficient
* measurement of their contents.
* </p>
*
* <p>
* <strong>CONTRACT:</strong> When overriding this method, you
* <em>must</em> call {@link #setMeasuredDimension(int, int)} to store the
* measured width and height of this view. Failure to do so will trigger an
* <code>IllegalStateException</code>, thrown by
* {@link #measure(int, int)}. Calling the superclass'
* {@link #onMeasure(int, int)} is a valid use.
* </p>
*
* <p>
* The base class implementation of measure defaults to the background size,
* unless a larger size is allowed by the MeasureSpec. Subclasses should
* override {@link #onMeasure(int, int)} to provide better measurements of
* their content.
* </p>
*
* <p>
* If this method is overridden, it is the subclass's responsibility to make
* sure the measured height and width are at least the view's minimum height
* and width ({@link #getSuggestedMinimumHeight()} and
* {@link #getSuggestedMinimumWidth()}).
* </p>
*
* @param widthMeasureSpec horizontal space requirements as imposed by the parent.
* The requirements are encoded with
* {@link android.view.View.MeasureSpec}.
* @param heightMeasureSpec vertical space requirements as imposed by the parent.
* The requirements are encoded with
* {@link android.view.View.MeasureSpec}.
*
* @see #getMeasuredWidth()
* @see #getMeasuredHeight()
* @see #setMeasuredDimension(int, int)
* @see #getSuggestedMinimumHeight()
* @see #getSuggestedMinimumWidth()
* @see android.view.View.MeasureSpec#getMode(int)
* @see android.view.View.MeasureSpec#getSize(int)
*/
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
setMeasuredDimension(getDefaultSize(getSuggestedMinimumWidth(), widthMeasureSpec),
getDefaultSize(getSuggestedMinimumHeight(), heightMeasureSpec));
}
其实View类的onMeasure方法一般是由其子类来重写的。如对于用来应用程序窗口的顶层视图的DecorView类来说，它是通过父类FrameLayout来重写祖父类View的onMeasure方法的，接下来我们就分析FrameLayout类的onMeasure方法的实现。
分析onMeasure方法，我们先从子类DecorView的onMeasure方法入手，这个方法主要是调整了两个入参高度和宽度，然后调用其父类的onMeasure方法。
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
final DisplayMetrics metrics = getContext().getResources().getDisplayMetrics();
final boolean isPortrait =
getResources().getConfiguration().orientation == ORIENTATION_PORTRAIT;
final int widthMode = getMode(widthMeasureSpec);
final int heightMode = getMode(heightMeasureSpec);
boolean fixedWidth = false;
mApplyFloatingHorizontalInsets = false;
if (widthMode == AT_MOST) {
final TypedValue tvw = isPortrait ? mWindow.mFixedWidthMinor : mWindow.mFixedWidthMajor;
if (tvw != null && tvw.type != TypedValue.TYPE_NULL) {
final int w;
if (tvw.type == TypedValue.TYPE_DIMENSION) {
w = (int) tvw.getDimension(metrics);
} else if (tvw.type == TypedValue.TYPE_FRACTION) {
w = (int) tvw.getFraction(metrics.widthPixels, metrics.widthPixels);
} else {
w = 0;
}
if (DEBUG_MEASURE) Log.d(mLogTag, "Fixed width: " + w);
final int widthSize = MeasureSpec.getSize(widthMeasureSpec);
if (w > 0) {
widthMeasureSpec = MeasureSpec.makeMeasureSpec(
Math.min(w, widthSize), EXACTLY);
fixedWidth = true;
} else {
widthMeasureSpec = MeasureSpec.makeMeasureSpec(
widthSize - mFloatingInsets.left - mFloatingInsets.right,
AT_MOST);
mApplyFloatingHorizontalInsets = true;
}
}
}
mApplyFloatingVerticalInsets = false;
if (heightMode == AT_MOST) {
final TypedValue tvh = isPortrait ? mWindow.mFixedHeightMajor
: mWindow.mFixedHeightMinor;
if (tvh != null && tvh.type != TypedValue.TYPE_NULL) {
final int h;
if (tvh.type == TypedValue.TYPE_DIMENSION) {
h = (int) tvh.getDimension(metrics);
} else if (tvh.type == TypedValue.TYPE_FRACTION) {
h = (int) tvh.getFraction(metrics.heightPixels, metrics.heightPixels);
} else {
h = 0;
}
if (DEBUG_MEASURE) Log.d(mLogTag, "Fixed height: " + h);
final int heightSize = MeasureSpec.getSize(heightMeasureSpec);
if (h > 0) {
heightMeasureSpec = MeasureSpec.makeMeasureSpec(
Math.min(h, heightSize), EXACTLY);
} else if ((mWindow.getAttributes().flags & FLAG_LAYOUT_IN_SCREEN) == 0) {
heightMeasureSpec = MeasureSpec.makeMeasureSpec(
heightSize - mFloatingInsets.top - mFloatingInsets.bottom, AT_MOST);
mApplyFloatingVerticalInsets = true;
}
}
}
getOutsets(mOutsets);
if (mOutsets.top > 0 || mOutsets.bottom > 0) {
int mode = MeasureSpec.getMode(heightMeasureSpec);
if (mode != MeasureSpec.UNSPECIFIED) {
int height = MeasureSpec.getSize(heightMeasureSpec);
heightMeasureSpec = MeasureSpec.makeMeasureSpec(
height + mOutsets.top + mOutsets.bottom, mode);
}
}
if (mOutsets.left > 0 || mOutsets.right > 0) {
int mode = MeasureSpec.getMode(widthMeasureSpec);
if (mode != MeasureSpec.UNSPECIFIED) {
int width = MeasureSpec.getSize(widthMeasureSpec);
widthMeasureSpec = MeasureSpec.makeMeasureSpec(
width + mOutsets.left + mOutsets.right, mode);
}
}
super.onMeasure(widthMeasureSpec, heightMeasureSpec); // super
int width = getMeasuredWidth();
boolean measure = false;
widthMeasureSpec = MeasureSpec.makeMeasureSpec(width, EXACTLY);
if (!fixedWidth && widthMode == AT_MOST) {
final TypedValue tv = isPortrait ? mWindow.mMinWidthMinor : mWindow.mMinWidthMajor;
if (tv.type != TypedValue.TYPE_NULL) {
final int min;
if (tv.type == TypedValue.TYPE_DIMENSION) {
min = (int)tv.getDimension(metrics);
} else if (tv.type == TypedValue.TYPE_FRACTION) {
min = (int)tv.getFraction(mAvailableWidth, mAvailableWidth);
} else {
min = 0;
}
if (DEBUG_MEASURE) Log.d(mLogTag, "Adjust for min width: " + min + ", value::"
+ tv.coerceToString() + ", mAvailableWidth=" + mAvailableWidth);
if (width < min) {
widthMeasureSpec = MeasureSpec.makeMeasureSpec(min, EXACTLY);
measure = true;
}
}
}
// TODO: Support height?
if (measure) {
super.onMeasure(widthMeasureSpec, heightMeasureSpec);
}
}
再看FrameLayout的onMeasure方法，主要是遍历所有的子View进行测量，然后设置高度、宽度。
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
int count = getChildCount();
final boolean measureMatchParentChildren =
MeasureSpec.getMode(widthMeasureSpec) != MeasureSpec.EXACTLY ||
MeasureSpec.getMode(heightMeasureSpec) != MeasureSpec.EXACTLY;
mMatchParentChildren.clear();
int maxHeight = 0;
int maxWidth = 0;
int childState = 0;
for (int i = 0; i < count; i++) {
final View child = getChildAt(i);
if (mMeasureAllChildren || child.getVisibility() != GONE) {
measureChildWithMargins(child, widthMeasureSpec, 0, heightMeasureSpec, 0);
final LayoutParams lp = (LayoutParams) child.getLayoutParams();
maxWidth = Math.max(maxWidth,
child.getMeasuredWidth() + lp.leftMargin + lp.rightMargin);
maxHeight = Math.max(maxHeight,
child.getMeasuredHeight() + lp.topMargin + lp.bottomMargin);
childState = combineMeasuredStates(childState, child.getMeasuredState());
if (measureMatchParentChildren) {
if (lp.width == LayoutParams.MATCH_PARENT ||
lp.height == LayoutParams.MATCH_PARENT) {
mMatchParentChildren.add(child);
}
}
}
}
// Account for padding too
maxWidth += getPaddingLeftWithForeground() + getPaddingRightWithForeground();
maxHeight += getPaddingTopWithForeground() + getPaddingBottomWithForeground();
// Check against our minimum height and width
maxHeight = Math.max(maxHeight, getSuggestedMinimumHeight());
maxWidth = Math.max(maxWidth, getSuggestedMinimumWidth());
// Check against our foreground's minimum height and width
final Drawable drawable = getForeground();
if (drawable != null) {
maxHeight = Math.max(maxHeight, drawable.getMinimumHeight());
maxWidth = Math.max(maxWidth, drawable.getMinimumWidth());
}
setMeasuredDimension(resolveSizeAndState(maxWidth, widthMeasureSpec, childState),
resolveSizeAndState(maxHeight, heightMeasureSpec,
childState << MEASURED_HEIGHT_STATE_SHIFT)); // resolveSizeAndState
count = mMatchParentChildren.size();
if (count > 1) {
for (int i = 0; i < count; i++) {
final View child = mMatchParentChildren.get(i);
final MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams();
final int childWidthMeasureSpec;
if (lp.width == LayoutParams.MATCH_PARENT) {
final int width = Math.max(0, getMeasuredWidth()
- getPaddingLeftWithForeground() - getPaddingRightWithForeground()
- lp.leftMargin - lp.rightMargin);
childWidthMeasureSpec = MeasureSpec.makeMeasureSpec(
width, MeasureSpec.EXACTLY);
} else {
childWidthMeasureSpec = getChildMeasureSpec(widthMeasureSpec,
getPaddingLeftWithForeground() + getPaddingRightWithForeground() +
lp.leftMargin + lp.rightMargin,
lp.width);
}
final int childHeightMeasureSpec;
if (lp.height == LayoutParams.MATCH_PARENT) {
final int height = Math.max(0, getMeasuredHeight()
- getPaddingTopWithForeground() - getPaddingBottomWithForeground()
- lp.topMargin - lp.bottomMargin);
childHeightMeasureSpec = MeasureSpec.makeMeasureSpec(
height, MeasureSpec.EXACTLY);
} else {
childHeightMeasureSpec = getChildMeasureSpec(heightMeasureSpec,
getPaddingTopWithForeground() + getPaddingBottomWithForeground() +
lp.topMargin + lp.bottomMargin,
lp.height);
}
child.measure(childWidthMeasureSpec, childHeightMeasureSpec);
}
}
}
首先是调用measureChildWithMargins方法来测量每一个子视图的宽度和高度，并且找到这些子视图的最大宽度和高度值，保存在变量maxWidth和maxHeight 中。
接着再将前面得到的宽度maxWidth和高度maxHeight分别加上当前视图所设置的Padding值，得到的宽度maxWidth和高度maxHeight还不是最终的宽度和高度，还需要考虑以下两个因素：
1. 当前视图是否设置有最小宽度和高度。如果设置有的话，并且它们比前面计算得到的宽度maxWidth和高度maxHeight还要大，那么就将它们作为当前视图的宽度和高度值。
2. 当前视图是否设置有前景图。如果设置有的话，并且它们比前面计算得到的宽度maxWidth和高度maxHeight还要大，那么就将它们作为当前视图的宽度和高度值。
经过上述两步检查之后，FrameLayout类的成员函数onMeasure就得到了当前视图的宽度maxWidth和高度maxHeight。由于得到的宽度和高度又必须要限制在参数widthMeasureSpec和heightMeasureSpec所描述的宽度和高度规范之内，因此会调用从View类继承下来的resolveSizeAndState方法来获得正确的大小。得到了当前视图的正确大小之后，FrameLayout类的onMeasure方法就可以调用从父类View继承下来的setMeasuredDimension方法来将它们为当前视图的大小了。
我们首先来看一下resolveSizeAndState方法：
/**
* Utility to reconcile a desired size and state, with constraints imposed
* by a MeasureSpec. Will take the desired size, unless a different size
* is imposed by the constraints. The returned value is a compound integer,
* with the resolved size in the {@link #MEASURED_SIZE_MASK} bits and
* optionally the bit {@link #MEASURED_STATE_TOO_SMALL} set if the
* resulting size is smaller than the size the view wants to be.
*
* @param size How big the view wants to be.
* @param measureSpec Constraints imposed by the parent.
* @param childMeasuredState Size information bit mask for the view's
* children.
* @return Size information bit mask as defined by
* {@link #MEASURED_SIZE_MASK} and
* {@link #MEASURED_STATE_TOO_SMALL}.
*/
public static int resolveSizeAndState(int size, int measureSpec, int childMeasuredState) {
final int specMode = MeasureSpec.getMode(measureSpec);
final int specSize = MeasureSpec.getSize(measureSpec);
final int result;
switch (specMode) {
case MeasureSpec.AT_MOST:
if (specSize < size) {
result = specSize | MEASURED_STATE_TOO_SMALL;
} else {
result = size;
}
break;
case MeasureSpec.EXACTLY:
result = specSize;
break;
case MeasureSpec.UNSPECIFIED:
default:
result = size;
}
return result | (childMeasuredState & MEASURED_STATE_MASK);
}
该方法把measureSpec入参的mode和size解析出来，mode封装在高位中，然后根据mode来决定最后返回的size。
回到FrameLayout的onMeasure方法，继续分析从父类View继承下来的setMeasuredDimension方法：
/**
* <p>This method must be called by {@link #onMeasure(int, int)} to store the
* measured width and measured height. Failing to do so will trigger an
* exception at measurement time.</p>
*
* @param measuredWidth The measured width of this view. May be a complex
* bit mask as defined by {@link #MEASURED_SIZE_MASK} and
* {@link #MEASURED_STATE_TOO_SMALL}.
* @param measuredHeight The measured height of this view. May be a complex
* bit mask as defined by {@link #MEASURED_SIZE_MASK} and
* {@link #MEASURED_STATE_TOO_SMALL}.
*/
protected final void setMeasuredDimension(int measuredWidth, int measuredHeight) {
boolean optical = isLayoutModeOptical(this);
if (optical != isLayoutModeOptical(mParent)) {
Insets insets = getOpticalInsets();
int opticalWidth = insets.left + insets.right;
int opticalHeight = insets.top + insets.bottom;
measuredWidth += optical ? opticalWidth : -opticalWidth;
measuredHeight += optical ? opticalHeight : -opticalHeight;
}
setMeasuredDimensionRaw(measuredWidth, measuredHeight);
}
该方法中最关键的步骤是对View的两个成员变量进行一次赋值，设置自己所需要的大小。计算的根据是在xml文件或者代码中设置的宽度和高度的参数，参数指明了要求你是填充父控件（match_parent）还是包裹内容（wrap_content）还是精确的一个大小，但最终你的大小不应该超过父控件给你提供的空间。
onMeasure()方法结束之前必须调用setMeasuredDimension()来设置View.mMeasuredWidth和View.mMeasuredHeight两个参数。
* Sets the measured dimension without extra processing for things like optical bounds.
* Useful for reapplying consistent values that have already been cooked with adjustments
* for optical bounds, etc. such as those from the measurement cache.
*
* @param measuredWidth The measured width of this view. May be a complex
* bit mask as defined by {@link #MEASURED_SIZE_MASK} and
* {@link #MEASURED_STATE_TOO_SMALL}.
* @param measuredHeight The measured height of this view. May be a complex
* bit mask as defined by {@link #MEASURED_SIZE_MASK} and
* {@link #MEASURED_STATE_TOO_SMALL}.
*/
private void setMeasuredDimensionRaw(int measuredWidth, int measuredHeight) {
mMeasuredWidth = measuredWidth;
mMeasuredHeight = measuredHeight;
mPrivateFlags |= PFLAG_MEASURED_DIMENSION_SET;
}
而当这两个成员变量设置完成，也就是当前的View测量结束了。
简单总结概括一下，measure的时序图如下：
image.png
3、performLayout
继续分析ViewRootImpl的performLayout方法：
private void performLayout(WindowManager.LayoutParams lp, int desiredWindowWidth,
int desiredWindowHeight) {
mLayoutRequested = false;
mScrollMayChange = true;
mInLayout = true;
final View host = mView;
if (DEBUG_ORIENTATION || DEBUG_LAYOUT) {
Log.v(mTag, "Laying out " + host + " to (" +
host.getMeasuredWidth() + ", " + host.getMeasuredHeight() + ")");
}
Trace.traceBegin(Trace.TRACE_TAG_VIEW, "layout");
try {
host.layout(0, 0, host.getMeasuredWidth(), host.getMeasuredHeight()); // layout
mInLayout = false;
int numViewsRequestingLayout = mLayoutRequesters.size();
if (numViewsRequestingLayout > 0) {
// requestLayout() was called during layout.
// If no layout-request flags are set on the requesting views, there is no problem.
// If some requests are still pending, then we need to clear those flags and do
// a full request/measure/layout pass to handle this situation.
ArrayList<View> validLayoutRequesters = getValidLayoutRequesters(mLayoutRequesters,
false);
if (validLayoutRequesters != null) {
// Set this flag to indicate that any further requests are happening during
// the second pass, which may result in posting those requests to the next
// frame instead
mHandlingLayoutInLayoutRequest = true;
// Process fresh layout requests, then measure and layout
int numValidRequests = validLayoutRequesters.size();
for (int i = 0; i < numValidRequests; ++i) {
final View view = validLayoutRequesters.get(i);
Log.w("View", "requestLayout() improperly called by " + view +
" during layout: running second layout pass");
view.requestLayout();
}
measureHierarchy(host, lp, mView.getContext().getResources(),
desiredWindowWidth, desiredWindowHeight);
mInLayout = true;
host.layout(0, 0, host.getMeasuredWidth(), host.getMeasuredHeight());
mHandlingLayoutInLayoutRequest = false;
// Check the valid requests again, this time without checking/clearing the
// layout flags, since requests happening during the second pass get noop'd
validLayoutRequesters = getValidLayoutRequesters(mLayoutRequesters, true);
if (validLayoutRequesters != null) {
final ArrayList<View> finalRequesters = validLayoutRequesters;
// Post second-pass requests to the next frame
getRunQueue().post(new Runnable() {
@Override
public void run() {
int numValidRequests = finalRequesters.size();
for (int i = 0; i < numValidRequests; ++i) {
final View view = finalRequesters.get(i);
Log.w("View", "requestLayout() improperly called by " + view +
" during second layout pass: posting in next frame");
view.requestLayout();
}
}
});
}
}
}
} finally {
Trace.traceEnd(Trace.TRACE_TAG_VIEW);
}
mInLayout = false;
}
调用了根视图的layout()方法，从传递的4个参数知道DecorView布局的位置是从屏幕最左最顶端开始布局，到屏幕最低最右结束。因此DecorView根布局是充满整个屏幕的。
继续分析View类的layout方法：
/**
* Assign a size and position to a view and all of its
* descendants
*
* <p>This is the second phase of the layout mechanism.
* (The first is measuring). In this phase, each parent calls
* layout on all of its children to position them.
* This is typically done using the child measurements
* that were stored in the measure pass().</p>
*
* <p>Derived classes should not override this method.
* Derived classes with children should override
* onLayout. In that method, they should
* call layout on each of their children.</p>
*
* @param l Left position, relative to parent
* @param t Top position, relative to parent
* @param r Right position, relative to parent
* @param b Bottom position, relative to parent
*/
@SuppressWarnings({"unchecked"})
public void layout(int l, int t, int r, int b) {
if ((mPrivateFlags3 & PFLAG3_MEASURE_NEEDED_BEFORE_LAYOUT) != 0) {
onMeasure(mOldWidthMeasureSpec, mOldHeightMeasureSpec);
mPrivateFlags3 &= ~PFLAG3_MEASURE_NEEDED_BEFORE_LAYOUT;
}
int oldL = mLeft;
int oldT = mTop;
int oldB = mBottom;
int oldR = mRight;
boolean changed = isLayoutModeOptical(mParent) ?
setOpticalFrame(l, t, r, b) : setFrame(l, t, r, b); // setFrame
if (changed || (mPrivateFlags & PFLAG_LAYOUT_REQUIRED) == PFLAG_LAYOUT_REQUIRED) {
onLayout(changed, l, t, r, b); // onLayout
if (shouldDrawRoundScrollbar()) {
if(mRoundScrollbarRenderer == null) {
mRoundScrollbarRenderer = new RoundScrollbarRenderer(this);
}
} else {
mRoundScrollbarRenderer = null;
}
mPrivateFlags &= ~PFLAG_LAYOUT_REQUIRED;
ListenerInfo li = mListenerInfo;
if (li != null && li.mOnLayoutChangeListeners != null) {
ArrayList<OnLayoutChangeListener> listenersCopy =
(ArrayList<OnLayoutChangeListener>)li.mOnLayoutChangeListeners.clone();
int numListeners = listenersCopy.size();
for (int i = 0; i < numListeners; ++i) {
listenersCopy.get(i).onLayoutChange(this, l, t, r, b, oldL, oldT, oldR, oldB);
}
}
}
mPrivateFlags &= ~PFLAG_FORCE_LAYOUT;
mPrivateFlags3 |= PFLAG3_IS_LAID_OUT;
}
layout()方法有四个参数，分别是left, top, right, bottom，它们是相对于父控件的位移距离。方法里面先调用了setFrame()方法，该方法非常重要：
/**
* Assign a size and position to this view.
*
* This is called from layout.
*
* @param left Left position, relative to parent
* @param top Top position, relative to parent
* @param right Right position, relative to parent
* @param bottom Bottom position, relative to parent
* @return true if the new size and position are different than the
* previous ones
* {@hide}
*/
protected boolean setFrame(int left, int top, int right, int bottom) {
boolean changed = false;
if (DBG) {
Log.d("View", this + " View.setFrame(" + left + "," + top + ","
+ right + "," + bottom + ")");
}
if (mLeft != left || mRight != right || mTop != top || mBottom != bottom) {
changed = true;
// Remember our drawn bit
int drawn = mPrivateFlags & PFLAG_DRAWN;
int oldWidth = mRight - mLeft;
int oldHeight = mBottom - mTop;
int newWidth = right - left;
int newHeight = bottom - top;
boolean sizeChanged = (newWidth != oldWidth) || (newHeight != oldHeight);
// Invalidate our old position
invalidate(sizeChanged);
mLeft = left;
mTop = top;
mRight = right;
mBottom = bottom;
mRenderNode.setLeftTopRightBottom(mLeft, mTop, mRight, mBottom);
mPrivateFlags |= PFLAG_HAS_BOUNDS;
if (sizeChanged) {
sizeChange(newWidth, newHeight, oldWidth, oldHeight);
}
if ((mViewFlags & VISIBILITY_MASK) == VISIBLE || mGhostView != null) {
// If we are visible, force the DRAWN bit to on so that
// this invalidate will go through (at least to our parent).
// This is because someone may have invalidated this view
// before this call to setFrame came in, thereby clearing
// the DRAWN bit.
mPrivateFlags |= PFLAG_DRAWN;
invalidate(sizeChanged);
// parent display list may need to be recreated based on a change in the bounds
// of any child
invalidateParentCaches();
}
// Reset drawn bit to original value (invalidate turns it off)
mPrivateFlags |= drawn;
mBackgroundSizeChanged = true;
if (mForegroundInfo != null) {
mForegroundInfo.mBoundsChanged = true;
}
notifySubtreeAccessibilityStateChangedIfNeeded();
}
return changed;
}
该方法先判断当前视图的大小或者位置是否发生变化，将参数保存起来。当前视图距离父视图的边距一旦设置好之后，它就是一个具有边界的视图了。接下来又会计算当前视图新的宽度newWidth和高度newHeight，如果它们与上一次的宽度oldWidth和oldHeight的值不相等，那么就说明当前视图的大小发生了变化，这时候就会调用onSizeChanged方法来让子类有机会处理这个变化事件。
继续回到layout()方法，后面调用了onLayout()方法，实际上是给自己的子控件布局。从以上可以知道measure出来的宽度与高度，是该控件期望得到的尺寸，但是真正显示到屏幕上的位置与大小是由layout()方法来决定的。left, top决定位置，right，bottom决定frame渲染尺寸。
/**
* Called from layout when this view should
* assign a size and position to each of its children.
*
* Derived classes with children should override
* this method and call layout on each of
* their children.
* @param changed This is a new size or position for this view
* @param left Left position, relative to parent
* @param top Top position, relative to parent
* @param right Right position, relative to parent
* @param bottom Bottom position, relative to parent
*/
protected void onLayout(boolean changed, int left, int top, int right, int bottom) {
}
发现onLayout方法是空的，直接看DecorView的onLayout方法：
@Override
protected void onLayout(boolean changed, int left, int top, int right, int bottom) {
super.onLayout(changed, left, top, right, bottom); // super
getOutsets(mOutsets);
if (mOutsets.left > 0) {
offsetLeftAndRight(-mOutsets.left);
}
if (mOutsets.top > 0) {
offsetTopAndBottom(-mOutsets.top);
}
if (mApplyFloatingVerticalInsets) {
offsetTopAndBottom(mFloatingInsets.top);
}
if (mApplyFloatingHorizontalInsets) {
offsetLeftAndRight(mFloatingInsets.left);
}
// If the application changed its SystemUI metrics, we might also have to adapt
// our shadow elevation.
updateElevation();
mAllowUpdateElevation = true;
if (changed && mResizeMode == RESIZE_MODE_DOCKED_DIVIDER) {
getViewRootImpl().requestInvalidateRootRenderNode();
}
}
这里先是调用了FrameLayout的onLayout方法，然后是调整个别参数。继续看父类FrameLayout的onLayout方法：
@Override
protected void onLayout(boolean changed, int left, int top, int right, int bottom) {
layoutChildren(left, top, right, bottom, false /* no force left gravity */);
}
直接调用了调用了layoutChildren方法，继续分析：
void layoutChildren(int left, int top, int right, int bottom, boolean forceLeftGravity) {
final int count = getChildCount();
final int parentLeft = getPaddingLeftWithForeground();
final int parentRight = right - left - getPaddingRightWithForeground();
final int parentTop = getPaddingTopWithForeground();
final int parentBottom = bottom - top - getPaddingBottomWithForeground();
for (int i = 0; i < count; i++) {
final View child = getChildAt(i);
if (child.getVisibility() != GONE) {
final LayoutParams lp = (LayoutParams) child.getLayoutParams();
final int width = child.getMeasuredWidth();
final int height = child.getMeasuredHeight();
int childLeft;
int childTop;
int gravity = lp.gravity;
if (gravity == -1) {
gravity = DEFAULT_CHILD_GRAVITY;
}
final int layoutDirection = getLayoutDirection();
final int absoluteGravity = Gravity.getAbsoluteGravity(gravity, layoutDirection);
final int verticalGravity = gravity & Gravity.VERTICAL_GRAVITY_MASK;
switch (absoluteGravity & Gravity.HORIZONTAL_GRAVITY_MASK) {
case Gravity.CENTER_HORIZONTAL:
childLeft = parentLeft + (parentRight - parentLeft - width) / 2 +
lp.leftMargin - lp.rightMargin;
break;
case Gravity.RIGHT:
if (!forceLeftGravity) {
childLeft = parentRight - width - lp.rightMargin;
break;
}
case Gravity.LEFT:
default:
childLeft = parentLeft + lp.leftMargin;
}
switch (verticalGravity) {
case Gravity.TOP:
childTop = parentTop + lp.topMargin;
break;
case Gravity.CENTER_VERTICAL:
childTop = parentTop + (parentBottom - parentTop - height) / 2 +
lp.topMargin - lp.bottomMargin;
break;
case Gravity.BOTTOM:
childTop = parentBottom - height - lp.bottomMargin;
break;
default:
childTop = parentTop + lp.topMargin;
}
child.layout(childLeft, childTop, childLeft + width, childTop + height);
}
}
}
该方法遍历各个子View，然后调用子View的layout方法。
需要注意的是FrameLayout布局其实在View类中的layout方法中已经实现，布局的逻辑实现是在父视图中实现的，不像View视图的measure测量，通过子类实现onMeasure方法来实现测量逻辑。
自定义View一般都无需重写onMeasure方法，但是如果自定义一个ViewGroup容器的话，就必须实现onLayout方法，因为该方法在ViewGroup是抽象的，所有ViewGroup的所有子类必须实现onLayout方法。
简单总结概括一下，layout的时序图如下：
image
4、performDraw
继续分析ViewRootImpl的performDraw方法：
private void performDraw() {
if (mAttachInfo.mDisplayState == Display.STATE_OFF && !mReportNextDraw) {
return;
}
final boolean fullRedrawNeeded = mFullRedrawNeeded;
mFullRedrawNeeded = false;
mIsDrawing = true;
Trace.traceBegin(Trace.TRACE_TAG_VIEW, "draw");
try {
draw(fullRedrawNeeded); // draw
} finally {
mIsDrawing = false;
Trace.traceEnd(Trace.TRACE_TAG_VIEW);
}
// For whatever reason we didn't create a HardwareRenderer, end any
// hardware animations that are now dangling
if (mAttachInfo.mPendingAnimatingRenderNodes != null) {
final int count = mAttachInfo.mPendingAnimatingRenderNodes.size();
for (int i = 0; i < count; i++) {
mAttachInfo.mPendingAnimatingRenderNodes.get(i).endAllAnimators();
}
mAttachInfo.mPendingAnimatingRenderNodes.clear();
}
if (mReportNextDraw) {
mReportNextDraw = false;
// if we're using multi-thread renderer, wait for the window frame draws
if (mWindowDrawCountDown != null) {
try {
mWindowDrawCountDown.await();
} catch (InterruptedException e) {
Log.e(mTag, "Window redraw count down interruped!");
}
mWindowDrawCountDown = null;
}
if (mAttachInfo.mHardwareRenderer != null) {
mAttachInfo.mHardwareRenderer.fence();
mAttachInfo.mHardwareRenderer.setStopped(mStopped);
}
if (LOCAL_LOGV) {
Log.v(mTag, "FINISHED DRAWING: " + mWindowAttributes.getTitle());
}
if (mSurfaceHolder != null && mSurface.isValid()) {
mSurfaceHolderCallback.surfaceRedrawNeeded(mSurfaceHolder);
SurfaceHolder.Callback callbacks[] = mSurfaceHolder.getCallbacks();
if (callbacks != null) {
for (SurfaceHolder.Callback c : callbacks) {
if (c instanceof SurfaceHolder.Callback2) {
((SurfaceHolder.Callback2)c).surfaceRedrawNeeded(mSurfaceHolder);
}
}
}
}
try {
mWindowSession.finishDrawing(mWindow);
} catch (RemoteException e) {
}
}
}
这里面主要是调用draw方法：
private void draw(boolean fullRedrawNeeded) {
Surface surface = mSurface;
if (!surface.isValid()) {
return;
}
if (DEBUG_FPS) {
trackFPS();
}
if (!sFirstDrawComplete) {
synchronized (sFirstDrawHandlers) {
sFirstDrawComplete = true;
final int count = sFirstDrawHandlers.size();
for (int i = 0; i< count; i++) {
mHandler.post(sFirstDrawHandlers.get(i));
}
}
}
scrollToRectOrFocus(null, false);
if (mAttachInfo.mViewScrollChanged) {
mAttachInfo.mViewScrollChanged = false;
mAttachInfo.mTreeObserver.dispatchOnScrollChanged();
}
boolean animating = mScroller != null && mScroller.computeScrollOffset();
final int curScrollY;
if (animating) {
curScrollY = mScroller.getCurrY();
} else {
curScrollY = mScrollY;
}
if (mCurScrollY != curScrollY) {
mCurScrollY = curScrollY;
fullRedrawNeeded = true;
if (mView instanceof RootViewSurfaceTaker) {
((RootViewSurfaceTaker) mView).onRootViewScrollYChanged(mCurScrollY);
}
}
final float appScale = mAttachInfo.mApplicationScale;
final boolean scalingRequired = mAttachInfo.mScalingRequired;
int resizeAlpha = 0;
final Rect dirty = mDirty;
if (mSurfaceHolder != null) {
// The app owns the surface, we won't draw.
dirty.setEmpty();
if (animating && mScroller != null) {
mScroller.abortAnimation();
}
return;
}
if (fullRedrawNeeded) {
mAttachInfo.mIgnoreDirtyState = true;
dirty.set(0, 0, (int) (mWidth * appScale + 0.5f), (int) (mHeight * appScale + 0.5f));
}
if (DEBUG_ORIENTATION || DEBUG_DRAW) {
Log.v(mTag, "Draw " + mView + "/"
+ mWindowAttributes.getTitle()
+ ": dirty={" + dirty.left + "," + dirty.top
+ "," + dirty.right + "," + dirty.bottom + "} surface="
+ surface + " surface.isValid()=" + surface.isValid() + ", appScale:" +
appScale + ", width=" + mWidth + ", height=" + mHeight);
}
mAttachInfo.mTreeObserver.dispatchOnDraw();
int xOffset = -mCanvasOffsetX;
int yOffset = -mCanvasOffsetY + curScrollY;
final WindowManager.LayoutParams params = mWindowAttributes;
final Rect surfaceInsets = params != null ? params.surfaceInsets : null;
if (surfaceInsets != null) {
xOffset -= surfaceInsets.left;
yOffset -= surfaceInsets.top;
// Offset dirty rect for surface insets.
dirty.offset(surfaceInsets.left, surfaceInsets.right);
}
boolean accessibilityFocusDirty = false;
final Drawable drawable = mAttachInfo.mAccessibilityFocusDrawable;
if (drawable != null) {
final Rect bounds = mAttachInfo.mTmpInvalRect;
final boolean hasFocus = getAccessibilityFocusedRect(bounds);
if (!hasFocus) {
bounds.setEmpty();
}
if (!bounds.equals(drawable.getBounds())) {
accessibilityFocusDirty = true;
}
}
mAttachInfo.mDrawingTime =
mChoreographer.getFrameTimeNanos() / TimeUtils.NANOS_PER_MS;
if (!dirty.isEmpty() || mIsAnimating || accessibilityFocusDirty) {
if (mAttachInfo.mHardwareRenderer != null && mAttachInfo.mHardwareRenderer.isEnabled()) {
// If accessibility focus moved, always invalidate the root.
boolean invalidateRoot = accessibilityFocusDirty || mInvalidateRootRequested;
mInvalidateRootRequested = false;
// Draw with hardware renderer.
mIsAnimating = false;
if (mHardwareYOffset != yOffset || mHardwareXOffset != xOffset) {
mHardwareYOffset = yOffset;
mHardwareXOffset = xOffset;
invalidateRoot = true;
}
if (invalidateRoot) {
mAttachInfo.mHardwareRenderer.invalidateRoot();
}
dirty.setEmpty();
// Stage the content drawn size now. It will be transferred to the renderer
// shortly before the draw commands get send to the renderer.
final boolean updated = updateContentDrawBounds();
if (mReportNextDraw) {
// report next draw overrides setStopped()
// This value is re-sync'd to the value of mStopped
// in the handling of mReportNextDraw post-draw.
mAttachInfo.mHardwareRenderer.setStopped(false);
}
if (updated) {
requestDrawWindow();
}
mAttachInfo.mHardwareRenderer.draw(mView, mAttachInfo, this);
} else {
// If we get here with a disabled & requested hardware renderer, something went
// wrong (an invalidate posted right before we destroyed the hardware surface
// for instance) so we should just bail out. Locking the surface with software
// rendering at this point would lock it forever and prevent hardware renderer
// from doing its job when it comes back.
// Before we request a new frame we must however attempt to reinitiliaze the
// hardware renderer if it's in requested state. This would happen after an
// eglTerminate() for instance.
if (mAttachInfo.mHardwareRenderer != null &&
!mAttachInfo.mHardwareRenderer.isEnabled() &&
mAttachInfo.mHardwareRenderer.isRequested()) {
try {
mAttachInfo.mHardwareRenderer.initializeIfNeeded(
mWidth, mHeight, mAttachInfo, mSurface, surfaceInsets);
} catch (OutOfResourcesException e) {
handleOutOfResourcesException(e);
return;
}
mFullRedrawNeeded = true;
scheduleTraversals();
return;
}
if (!drawSoftware(surface, mAttachInfo, xOffset, yOffset, scalingRequired, dirty)) { // drawSoftware
return;
}
}
}
if (animating) {
mFullRedrawNeeded = true;
scheduleTraversals();
}
}
方法结束前执行了drawSoftware方法：
/**
* @return true if drawing was successful, false if an error occurred
*/
private boolean drawSoftware(Surface surface, AttachInfo attachInfo, int xoff, int yoff,
boolean scalingRequired, Rect dirty) {
// Draw with software renderer.
final Canvas canvas;
try {
final int left = dirty.left;
final int top = dirty.top;
final int right = dirty.right;
final int bottom = dirty.bottom;
canvas = mSurface.lockCanvas(dirty);
// The dirty rectangle can be modified by Surface.lockCanvas()
//noinspection ConstantConditions
if (left != dirty.left || top != dirty.top || right != dirty.right
|| bottom != dirty.bottom) {
attachInfo.mIgnoreDirtyState = true;
}
// TODO: Do this in native
canvas.setDensity(mDensity);
} catch (Surface.OutOfResourcesException e) {
handleOutOfResourcesException(e);
return false;
} catch (IllegalArgumentException e) {
Log.e(mTag, "Could not lock surface", e);
// Don't assume this is due to out of memory, it could be
// something else, and if it is something else then we could
// kill stuff (or ourself) for no reason.
mLayoutRequested = true; // ask wm for a new surface next time.
return false;
}
try {
if (DEBUG_ORIENTATION || DEBUG_DRAW) {
Log.v(mTag, "Surface " + surface + " drawing to bitmap w="
+ canvas.getWidth() + ", h=" + canvas.getHeight());
//canvas.drawARGB(255, 255, 0, 0);
}
// If this bitmap's format includes an alpha channel, we
// need to clear it before drawing so that the child will
// properly re-composite its drawing on a transparent
// background. This automatically respects the clip/dirty region
// or
// If we are applying an offset, we need to clear the area
// where the offset doesn't appear to avoid having garbage
// left in the blank areas.
if (!canvas.isOpaque() || yoff != 0 || xoff != 0) {
canvas.drawColor(0, PorterDuff.Mode.CLEAR);
}
dirty.setEmpty();
mIsAnimating = false;
mView.mPrivateFlags |= View.PFLAG_DRAWN;
if (DEBUG_DRAW) {
Context cxt = mView.getContext();
Log.i(mTag, "Drawing: package:" + cxt.getPackageName() +
", metrics=" + cxt.getResources().getDisplayMetrics() +
", compatibilityInfo=" + cxt.getResources().getCompatibilityInfo());
}
try {
canvas.translate(-xoff, -yoff);
if (mTranslator != null) {
mTranslator.translateCanvas(canvas);
}
canvas.setScreenDensity(scalingRequired ? mNoncompatDensity : 0);
attachInfo.mSetIgnoreDirtyState = false;
mView.draw(canvas); // draw
drawAccessibilityFocusedDrawableIfNeeded(canvas);
} finally {
if (!attachInfo.mSetIgnoreDirtyState) {
// Only clear the flag if it was not set during the mView.draw() call
attachInfo.mIgnoreDirtyState = false;
}
}
} finally {
try {
surface.unlockCanvasAndPost(canvas);
} catch (IllegalArgumentException e) {
Log.e(mTag, "Could not unlock surface", e);
mLayoutRequested = true; // ask wm for a new surface next time.
//noinspection ReturnInsideFinallyBlock
return false;
}
if (LOCAL_LOGV) {
Log.v(mTag, "Surface " + surface + " unlockCanvasAndPost");
}
}
return true;
}
该方法首先获取需要重绘的位置，锁定并获取对应的canvas，最后调用了DecorView的draw方法。
@Override
public void draw(Canvas canvas) {
super.draw(canvas);
if (mMenuBackground != null) {
mMenuBackground.draw(canvas);
}
}
这里的代码非常简单，调用了父类的draw方法，以此查找最终定位到了View类的draw方法：
/**
* Manually render this view (and all of its children) to the given Canvas.
* The view must have already done a full layout before this function is
* called. When implementing a view, implement
* {@link #onDraw(android.graphics.Canvas)} instead of overriding this method.
* If you do need to override this method, call the superclass version.
*
* @param canvas The Canvas to which the View is rendered.
*/
@CallSuper
public void draw(Canvas canvas) {
final int privateFlags = mPrivateFlags;
final boolean dirtyOpaque = (privateFlags & PFLAG_DIRTY_MASK) == PFLAG_DIRTY_OPAQUE &&
(mAttachInfo == null || !mAttachInfo.mIgnoreDirtyState);
mPrivateFlags = (privateFlags & ~PFLAG_DIRTY_MASK) | PFLAG_DRAWN;
/*
* Draw traversal performs several drawing steps which must be executed
* in the appropriate order:
*
* 1. Draw the background
* 2. If necessary, save the canvas' layers to prepare for fading
* 3. Draw view's content
* 4. Draw children
* 5. If necessary, draw the fading edges and restore layers
* 6. Draw decorations (scrollbars for instance)
*/
// Step 1, draw the background, if needed
int saveCount;
if (!dirtyOpaque) {
drawBackground(canvas);
}
// skip step 2 & 5 if possible (common case)
final int viewFlags = mViewFlags;
boolean horizontalEdges = (viewFlags & FADING_EDGE_HORIZONTAL) != 0;
boolean verticalEdges = (viewFlags & FADING_EDGE_VERTICAL) != 0;
if (!verticalEdges && !horizontalEdges) {
// Step 3, draw the content
if (!dirtyOpaque) onDraw(canvas);
// Step 4, draw the children
dispatchDraw(canvas);
// Overlay is part of the content and draws beneath Foreground
if (mOverlay != null && !mOverlay.isEmpty()) {
mOverlay.getOverlayView().dispatchDraw(canvas);
}
// Step 6, draw decorations (foreground, scrollbars)
onDrawForeground(canvas);
// we're done...
return;
}
该类非常重要，也是最后比较关键的绘制操作。代码比较多，但是注释解释的非常清楚，流程具体如下：
1.绘制当前视图的背景。
2.保存当前画布的堆栈状态，并且在当前画布上创建额外的图层，以便接下来可以用来绘制当前视图在滑动时的边框渐变效果。
3.绘制当前视图的内容。
4.绘制当前视图的子视图的内容。
5.绘制当前视图在滑动时的边框渐变效果。
6.绘制当前视图的滚动条。
接下来分别分析这个流程，首先来看背景的绘制，接着是保存画布canvas的边框参数。获取当前视图View水平或者垂直方向是否需要绘制边框渐变效果，如果不需要绘制边框的渐变效果，就无需执行上面的2、5了，那么就直接执行上面的3、4、6步骤。假如我们需要绘制视图View的边框渐变效果，那么我们继续分析步骤2，3，4，5，6。
接着后面的代码用来检查是否需要保存参数canvas所描述的一块画布的堆栈状态，并且创建额外的图层来绘制当前视图在滑动时的边框渐变效果。首先需要计算出当前视图的左、右、上以及下内边距的大小，以便得到边框所要绘制的区域。
然后接着绘制当前视图的内容，调用了onDraw方法：
/**
* Implement this to do your drawing.
*
* @param canvas the canvas on which the background will be drawn
*/
protected void onDraw(Canvas canvas) {
}
发现该方法为空，主要在子类中实现，继续看DecorView的onDraw方法：
@Override
public void onDraw(Canvas c) {
super.onDraw(c);
mBackgroundFallback.draw(mContentRoot, c, mWindow.mContentParent);
}
当前视图的内容绘制完成后，接着绘制子视图的内容，调用了dispatchDraw方法。
/**
* Called by draw to draw the child views. This may be overridden
* by derived classes to gain control just before its children are drawn
* (but after its own view has been drawn).
* @param canvas the canvas on which to draw the view
*/
protected void dispatchDraw(Canvas canvas) {
}
发现该方法为空，真正的实现在ViewGroup中：
@Override
protected void dispatchDraw(Canvas canvas) {
boolean usingRenderNodeProperties = canvas.isRecordingFor(mRenderNode);
final int childrenCount = mChildrenCount;
final View[] children = mChildren;
int flags = mGroupFlags;
if ((flags & FLAG_RUN_ANIMATION) != 0 && canAnimate()) {
final boolean buildCache = !isHardwareAccelerated();
for (int i = 0; i < childrenCount; i++) {
final View child = children[i];
if ((child.mViewFlags & VISIBILITY_MASK) == VISIBLE) {
final LayoutParams params = child.getLayoutParams();
attachLayoutAnimationParameters(child, params, i, childrenCount);
bindLayoutAnimation(child);
}
}
final LayoutAnimationController controller = mLayoutAnimationController;
if (controller.willOverlap()) {
mGroupFlags |= FLAG_OPTIMIZE_INVALIDATE;
}
controller.start();
mGroupFlags &= ~FLAG_RUN_ANIMATION;
mGroupFlags &= ~FLAG_ANIMATION_DONE;
if (mAnimationListener != null) {
mAnimationListener.onAnimationStart(controller.getAnimation());
}
}
int clipSaveCount = 0;
final boolean clipToPadding = (flags & CLIP_TO_PADDING_MASK) == CLIP_TO_PADDING_MASK;
if (clipToPadding) {
clipSaveCount = canvas.save();
canvas.clipRect(mScrollX + mPaddingLeft, mScrollY + mPaddingTop,
mScrollX + mRight - mLeft - mPaddingRight,
mScrollY + mBottom - mTop - mPaddingBottom);
}
// We will draw our child's animation, let's reset the flag
mPrivateFlags &= ~PFLAG_DRAW_ANIMATION;
mGroupFlags &= ~FLAG_INVALIDATE_REQUIRED;
boolean more = false;
final long drawingTime = getDrawingTime();
if (usingRenderNodeProperties) canvas.insertReorderBarrier();
final int transientCount = mTransientIndices == null ? 0 : mTransientIndices.size();
int transientIndex = transientCount != 0 ? 0 : -1;
// Only use the preordered list if not HW accelerated, since the HW pipeline will do the
// draw reordering internally
final ArrayList<View> preorderedList = usingRenderNodeProperties
? null : buildOrderedChildList();
final boolean customOrder = preorderedList == null
&& isChildrenDrawingOrderEnabled();
for (int i = 0; i < childrenCount; i++) {
while (transientIndex >= 0 && mTransientIndices.get(transientIndex) == i) {
final View transientChild = mTransientViews.get(transientIndex);
if ((transientChild.mViewFlags & VISIBILITY_MASK) == VISIBLE ||
transientChild.getAnimation() != null) {
more |= drawChild(canvas, transientChild, drawingTime); // drawChild
}
transientIndex++;
if (transientIndex >= transientCount) {
transientIndex = -1;
}
}
final int childIndex = getAndVerifyPreorderedIndex(childrenCount, i, customOrder);
final View child = getAndVerifyPreorderedView(preorderedList, children, childIndex);
if ((child.mViewFlags & VISIBILITY_MASK) == VISIBLE || child.getAnimation() != null) {
more |= drawChild(canvas, child, drawingTime);
}
}
while (transientIndex >= 0) {
// there may be additional transient views after the normal views
final View transientChild = mTransientViews.get(transientIndex);
if ((transientChild.mViewFlags & VISIBILITY_MASK) == VISIBLE ||
transientChild.getAnimation() != null) {
more |= drawChild(canvas, transientChild, drawingTime);
}
transientIndex++;
if (transientIndex >= transientCount) {
break;
}
}
if (preorderedList != null) preorderedList.clear();
// Draw any disappearing views that have animations
if (mDisappearingChildren != null) {
final ArrayList<View> disappearingChildren = mDisappearingChildren;
final int disappearingCount = disappearingChildren.size() - 1;
// Go backwards -- we may delete as animations finish
for (int i = disappearingCount; i >= 0; i--) {
final View child = disappearingChildren.get(i);
more |= drawChild(canvas, child, drawingTime);
}
}
if (usingRenderNodeProperties) canvas.insertInorderBarrier();
if (debugDraw()) {
onDebugDraw(canvas);
}
if (clipToPadding) {
canvas.restoreToCount(clipSaveCount);
}
// mGroupFlags might have been updated by drawChild()
flags = mGroupFlags;
if ((flags & FLAG_INVALIDATE_REQUIRED) == FLAG_INVALIDATE_REQUIRED) {
invalidate(true);
}
if ((flags & FLAG_ANIMATION_DONE) == 0 && (flags & FLAG_NOTIFY_ANIMATION_LISTENER) == 0 &&
mLayoutAnimationController.isDone() && !more) {
// We want to erase the drawing cache and notify the listener after the
// next frame is drawn because one extra invalidate() is caused by
// drawChild() after the animation is over
mGroupFlags |= FLAG_NOTIFY_ANIMATION_LISTENER;
final Runnable end = new Runnable() {
@Override
public void run() {
notifyAnimationListener();
}
};
post(end);
}
}
首先判断当前ViewGroup容器是否设置的布局动画，然后遍历给每个子视图View设置动画效果，接着获得布局动画的控制器，最后开始布局动画。
接下来循环遍历每一个子View，并调用drawChild方法绘制当前视图的子视图View：
/**
* Draw one child of this View Group. This method is responsible for getting
* the canvas in the right state. This includes clipping, translating so
* that the child's scrolled origin is at 0, 0, and applying any animation
* transformations.
*
* @param canvas The canvas on which to draw the child
* @param child Who to draw
* @param drawingTime The time at which draw is occurring
* @return True if an invalidate() was issued
*/
protected boolean drawChild(Canvas canvas, View child, long drawingTime) {
return child.draw(canvas, this, drawingTime);
}
这个draw()方法也是view里面的方法，被drawChild()方法调用：
/**
* This method is called by ViewGroup.drawChild() to have each child view draw itself.
*
* This is where the View specializes rendering behavior based on layer type,
* and hardware acceleration.
*/
boolean draw(Canvas canvas, ViewGroup parent, long drawingTime) {
final boolean hardwareAcceleratedCanvas = canvas.isHardwareAccelerated();
/* If an attached view draws to a HW canvas, it may use its RenderNode + DisplayList.
*
* If a view is dettached, its DisplayList shouldn't exist. If the canvas isn't
* HW accelerated, it can't handle drawing RenderNodes.
*/
boolean drawingWithRenderNode = mAttachInfo != null
&& mAttachInfo.mHardwareAccelerated
&& hardwareAcceleratedCanvas;
boolean more = false;
final boolean childHasIdentityMatrix = hasIdentityMatrix();
final int parentFlags = parent.mGroupFlags;
if ((parentFlags & ViewGroup.FLAG_CLEAR_TRANSFORMATION) != 0) {
parent.getChildTransformation().clear();
parent.mGroupFlags &= ~ViewGroup.FLAG_CLEAR_TRANSFORMATION;
}
Transformation transformToApply = null;
boolean concatMatrix = false;
final boolean scalingRequired = mAttachInfo != null && mAttachInfo.mScalingRequired;
final Animation a = getAnimation();
if (a != null) {
more = applyLegacyAnimation(parent, drawingTime, a, scalingRequired);
concatMatrix = a.willChangeTransformationMatrix();
if (concatMatrix) {
mPrivateFlags3 |= PFLAG3_VIEW_IS_ANIMATING_TRANSFORM;
}
transformToApply = parent.getChildTransformation();
} else {
if ((mPrivateFlags3 & PFLAG3_VIEW_IS_ANIMATING_TRANSFORM) != 0) {
// No longer animating: clear out old animation matrix
mRenderNode.setAnimationMatrix(null);
mPrivateFlags3 &= ~PFLAG3_VIEW_IS_ANIMATING_TRANSFORM;
}
if (!drawingWithRenderNode
&& (parentFlags & ViewGroup.FLAG_SUPPORT_STATIC_TRANSFORMATIONS) != 0) {
final Transformation t = parent.getChildTransformation();
final boolean hasTransform = parent.getChildStaticTransformation(this, t);
if (hasTransform) {
final int transformType = t.getTransformationType();
transformToApply = transformType != Transformation.TYPE_IDENTITY ? t : null;
concatMatrix = (transformType & Transformation.TYPE_MATRIX) != 0;
}
}
}
concatMatrix |= !childHasIdentityMatrix;
// Sets the flag as early as possible to allow draw() implementations
// to call invalidate() successfully when doing animations
mPrivateFlags |= PFLAG_DRAWN;
if (!concatMatrix &&
(parentFlags & (ViewGroup.FLAG_SUPPORT_STATIC_TRANSFORMATIONS |
ViewGroup.FLAG_CLIP_CHILDREN)) == ViewGroup.FLAG_CLIP_CHILDREN &&
canvas.quickReject(mLeft, mTop, mRight, mBottom, Canvas.EdgeType.BW) &&
(mPrivateFlags & PFLAG_DRAW_ANIMATION) == 0) {
mPrivateFlags2 |= PFLAG2_VIEW_QUICK_REJECTED;
return more;
}
mPrivateFlags2 &= ~PFLAG2_VIEW_QUICK_REJECTED;
if (hardwareAcceleratedCanvas) {
// Clear INVALIDATED flag to allow invalidation to occur during rendering, but
// retain the flag's value temporarily in the mRecreateDisplayList flag
mRecreateDisplayList = (mPrivateFlags & PFLAG_INVALIDATED) != 0;
mPrivateFlags &= ~PFLAG_INVALIDATED;
}
RenderNode renderNode = null;
Bitmap cache = null;
int layerType = getLayerType(); // TODO: signify cache state with just 'cache' local
if (layerType == LAYER_TYPE_SOFTWARE || !drawingWithRenderNode) {
if (layerType != LAYER_TYPE_NONE) {
// If not drawing with RenderNode, treat HW layers as SW
layerType = LAYER_TYPE_SOFTWARE;
buildDrawingCache(true);
}
cache = getDrawingCache(true);
}
if (drawingWithRenderNode) {
// Delay getting the display list until animation-driven alpha values are
// set up and possibly passed on to the view
renderNode = updateDisplayListIfDirty();
if (!renderNode.isValid()) {
// Uncommon, but possible. If a view is removed from the hierarchy during the call
// to getDisplayList(), the display list will be marked invalid and we should not
// try to use it again.
renderNode = null;
drawingWithRenderNode = false;
}
}
int sx = 0;
int sy = 0;
if (!drawingWithRenderNode) {
computeScroll();
sx = mScrollX;
sy = mScrollY;
}
final boolean drawingWithDrawingCache = cache != null && !drawingWithRenderNode;
final boolean offsetForScroll = cache == null && !drawingWithRenderNode;
int restoreTo = -1;
if (!drawingWithRenderNode || transformToApply != null) {
restoreTo = canvas.save();
}
if (offsetForScroll) {
canvas.translate(mLeft - sx, mTop - sy);
} else {
if (!drawingWithRenderNode) {
canvas.translate(mLeft, mTop);
}
if (scalingRequired) {
if (drawingWithRenderNode) {
// TODO: Might not need this if we put everything inside the DL
restoreTo = canvas.save();
}
// mAttachInfo cannot be null, otherwise scalingRequired == false
final float scale = 1.0f / mAttachInfo.mApplicationScale;
canvas.scale(scale, scale);
}
}
float alpha = drawingWithRenderNode ? 1 : (getAlpha() * getTransitionAlpha());
if (transformToApply != null
|| alpha < 1
|| !hasIdentityMatrix()
|| (mPrivateFlags3 & PFLAG3_VIEW_IS_ANIMATING_ALPHA) != 0) {
if (transformToApply != null || !childHasIdentityMatrix) {
int transX = 0;
int transY = 0;
if (offsetForScroll) {
transX = -sx;
transY = -sy;
}
if (transformToApply != null) {
if (concatMatrix) {
if (drawingWithRenderNode) {
renderNode.setAnimationMatrix(transformToApply.getMatrix());
} else {
// Undo the scroll translation, apply the transformation matrix,
// then redo the scroll translate to get the correct result.
canvas.translate(-transX, -transY);
canvas.concat(transformToApply.getMatrix());
canvas.translate(transX, transY);
}
parent.mGroupFlags |= ViewGroup.FLAG_CLEAR_TRANSFORMATION;
}
float transformAlpha = transformToApply.getAlpha();
if (transformAlpha < 1) {
alpha *= transformAlpha;
parent.mGroupFlags |= ViewGroup.FLAG_CLEAR_TRANSFORMATION;
}
}
if (!childHasIdentityMatrix && !drawingWithRenderNode) {
canvas.translate(-transX, -transY);
canvas.concat(getMatrix());
canvas.translate(transX, transY);
}
}
// Deal with alpha if it is or used to be <1
if (alpha < 1 || (mPrivateFlags3 & PFLAG3_VIEW_IS_ANIMATING_ALPHA) != 0) {
if (alpha < 1) {
mPrivateFlags3 |= PFLAG3_VIEW_IS_ANIMATING_ALPHA;
} else {
mPrivateFlags3 &= ~PFLAG3_VIEW_IS_ANIMATING_ALPHA;
}
parent.mGroupFlags |= ViewGroup.FLAG_CLEAR_TRANSFORMATION;
if (!drawingWithDrawingCache) {
final int multipliedAlpha = (int) (255 * alpha);
if (!onSetAlpha(multipliedAlpha)) {
if (drawingWithRenderNode) {
renderNode.setAlpha(alpha * getAlpha() * getTransitionAlpha());
} else if (layerType == LAYER_TYPE_NONE) {
canvas.saveLayerAlpha(sx, sy, sx + getWidth(), sy + getHeight(),
multipliedAlpha);
}
} else {
// Alpha is handled by the child directly, clobber the layer's alpha
mPrivateFlags |= PFLAG_ALPHA_SET;
}
}
}
} else if ((mPrivateFlags & PFLAG_ALPHA_SET) == PFLAG_ALPHA_SET) {
onSetAlpha(255);
mPrivateFlags &= ~PFLAG_ALPHA_SET;
}
if (!drawingWithRenderNode) {
// apply clips directly, since RenderNode won't do it for this draw
if ((parentFlags & ViewGroup.FLAG_CLIP_CHILDREN) != 0 && cache == null) {
if (offsetForScroll) {
canvas.clipRect(sx, sy, sx + getWidth(), sy + getHeight());
} else {
if (!scalingRequired || cache == null) {
canvas.clipRect(0, 0, getWidth(), getHeight());
} else {
canvas.clipRect(0, 0, cache.getWidth(), cache.getHeight());
}
}
}
if (mClipBounds != null) {
// clip bounds ignore scroll
canvas.clipRect(mClipBounds);
}
}
if (!drawingWithDrawingCache) {
if (drawingWithRenderNode) {
mPrivateFlags &= ~PFLAG_DIRTY_MASK;
((DisplayListCanvas) canvas).drawRenderNode(renderNode);
} else {
// Fast path for layouts with no backgrounds
if ((mPrivateFlags & PFLAG_SKIP_DRAW) == PFLAG_SKIP_DRAW) {
mPrivateFlags &= ~PFLAG_DIRTY_MASK;
dispatchDraw(canvas);
} else {
draw(canvas);
}
}
} else if (cache != null) {
mPrivateFlags &= ~PFLAG_DIRTY_MASK;
if (layerType == LAYER_TYPE_NONE || mLayerPaint == null) {
// no layer paint, use temporary paint to draw bitmap
Paint cachePaint = parent.mCachePaint;
if (cachePaint == null) {
cachePaint = new Paint();
cachePaint.setDither(false);
parent.mCachePaint = cachePaint;
}
cachePaint.setAlpha((int) (alpha * 255));
canvas.drawBitmap(cache, 0.0f, 0.0f, cachePaint);
} else {
// use layer paint to draw the bitmap, merging the two alphas, but also restore
int layerPaintAlpha = mLayerPaint.getAlpha();
if (alpha < 1) {
mLayerPaint.setAlpha((int) (alpha * layerPaintAlpha));
}
canvas.drawBitmap(cache, 0.0f, 0.0f, mLayerPaint);
if (alpha < 1) {
mLayerPaint.setAlpha(layerPaintAlpha);
}
}
}
if (restoreTo >= 0) {
canvas.restoreToCount(restoreTo);
}
if (a != null && !more) {
if (!hardwareAcceleratedCanvas && !a.getFillAfter()) {
onSetAlpha(255);
}
parent.finishAnimatingView(this, a);
}
if (more && hardwareAcceleratedCanvas) {
if (a.hasAlpha() && (mPrivateFlags & PFLAG_ALPHA_SET) == PFLAG_ALPHA_SET) {
// alpha animations should cause the child to recreate its display list
invalidate(true);
}
}
mRecreateDisplayList = false;
return more;
}
该方法主要判断是否有绘制缓存，如果有直接使用缓存，如果没有重复调用上面的draw()方法。
然后是第五步绘制滑动时的渐变效果，最后在绘制滚动条。
至此，所有的View对象都绘制出来了。
需要注意的是：View绘制的画布参数canvas是由surface对象获得，意味着View视图绘制最终会绘制到Surface对象去。父类View绘制主要是绘制背景、边框渐变效果、进度条，View具体的内容绘制调用了onDraw方法，通过该方法把View内容的绘制逻辑留给子类去实现。因此在自定义View的时候都一般都需要重写父类的onDraw方法来实现View内容绘制。
简单总结概括一下，draw的时序图如下：
image
总结
View的绘制流程是从 ViewRoot 的 performTraversals 方法开始的，它经过 measure、layout、draw三个过程才最终将一个View绘制出来，performTraversals会依次调用 performMeasure，performLayout和 performDraw 三个方法，这三个方法分别会完成 View 的 measure、layout、draw的流程。
image
View的绘制主流程
在measure方法中，会调用onMeasure方法，在onMeasure方法中会对所有的子元素进行measure过程，这个时候measure流程就从父容器传递给子容器，这样就完成了一次测量，接着子元素会重复父容器的measure的测量过程，如此反复的完成整个View树的过程。同理performLayout的执行原理和performDraw的执行原理与performMeasure的原理类似。
关于View的绘制流程，经常出现在Android面试过程中，同时会严重影响到界面开发。这一块理清了，无论是掌握系统View，还是自定义View，也或者是解决一些bug，都有不小的帮助。
View系列文章：
Android View从源码的角度分析加载流程
Android View从源码的角度分析Touch事件传递流程
Android View从源码的角度分析事件的注册和接收
