核心思想是修改 udev rules，然后重新加载网卡驱动既可
配置文件：/etc/udev/rules.d/net.rules
网卡驱动:e1000，如果 不是e1000驱动，请手动重启，或者手动重新加载网卡驱动
运行完成后，请检查 配置文件 /etc/udev/rules.d/net.rules
#!/bin/bash
# rename ethernet device name
function netdevice_list(){
echo "The ethernet device list : "
echo "-------------------------"
ip -bri link show | awk '{print $1}'
echo "-------------------------"
}
function usage(){
echo "Usage $(basename $0) {ethX} {newName} change ethernet device name, You can chroose one from above list. "
echo " $(basename $0) reset reset all devices name to system default."
exit 1
}
function driver_reload(){
modprobe -r e1000
modprobe e1000
echo "INFO:driver_e1000_reload"
}
function reset(){
echo "" > /etc/udev/rules.d/net.rules
driver_reload
echo "Reset to system default"
exit 0
}
case $1 in
"reset")
# reset /etc/udev/rules.d/net.rules to empty;
reset
;;
*)
if [ $# -eq 2 ];then
ip -c link show $1 &>/dev/null
if [ $? -ne 0 ];then
echo "Device $1 do not exsit!"
exit 1
fi
MACADDRESS=$(ip -bri link show $1| awk '{print $3}')
test -e /etc/udev/rules.d/net.rules && sed -i "/$MACADDRESS/d" /etc/udev/rules.d/net.rules
echo ''SUBSYSTEM==\"net\", ACTION==\"add\", DRIVERS==\"?*\", ATTR{address}==\"$MACADDRESS\", ATTR{type}==\"1\", NAME=\"$2\"'' >> /etc/udev/rules.d/net.rules
driver_reload
else
netdevice_list
usage
fi
;;
esac
