文章格式并不规范，其实只是为了做个记录，记录自己在搭建stf环境的时候所遇到各种坑，貌似一个简单的环境搭建，前前后后差不多五天时间。。。真心快崩溃了。对于真正搭建过此环境的人来说，可能会有借鉴作用吧，至于没接触过的童鞋，用处不大，建议就不要往下看了，就是这么任性~~~~
各种工具的下载安装：
1.安装xcode和xcode命令行工具（已有未验证这步）

Xcode：直接在 App Store 下载安装
Xcode Command Line Tools：在terminal中输入以下命令，然后在弹出的安装步骤中猛点下一步自动安装。
xcode-select --install

2.安装MacPorts，后面会用到port(参照MacPorts的安装）
3.SDK环境安装—已有，忽略。
4.nodejs的安装 — 已有，忽略。

[https://nodejs.org/en/](https://nodejs.org/en/)
验证：
node -v
v6.11.0

5.安装bower:

sudo npm install bower -g
验证：
bower -v 

6.安装rethinkdb（这里建议通过pgk安装）

[rethinkdb](https://www.rethinkdb.com/docs/install/)

7.安装graphicsmagick

do port install graphicsmagick

8.安装libsodium

sudo port install libsodium

9.安装zeromp

sudo port install zmq

10.安装protobuf

sudo port install protobuf-cpp

11.安装pkg-config

sudo port install pkgconfig

12.安装stf

sudo npm install -g stf

后续有报错：

npm WARN deprecated node-uuid@1.4.8: Use uuid module instead
/usr/local/bin/stf -> /usr/local/lib/node_modules/stf/bin/stf

> dtrace-provider@0.8.3 install /usr/local/lib/node_modules/stf/node_modules/bunyan/node_modules/dtrace-provider
> node scripts/install.js

> dtrace-provider@0.7.1 install /usr/local/lib/node_modules/stf/node_modules/dtrace-provider
> node scripts/install.js

> bufferutil@1.3.0 install /usr/local/lib/node_modules/stf/node_modules/bufferutil
> node-gyp rebuild

gyp WARN EACCES user "root" does not have permission to access the dev dir "/Users/zrck/.node-gyp/6.10.2"
gyp WARN EACCES attempting to reinstall using temporary dev dir "/usr/local/lib/node_modules/stf/node_modules/bufferutil/.node-gyp"
  CXX(target) Release/obj.target/bufferutil/src/bufferutil.o
  SOLINK_MODULE(target) Release/bufferutil.node

> jpeg-turbo@0.4.0 install /usr/local/lib/node_modules/stf/node_modules/jpeg-turbo
> node-pre-gyp install --fallback-to-build

gyp WARN EACCES user "root" does not have permission to access the dev dir "/Users/zrck/.node-gyp/6.10.2"
gyp WARN EACCES attempting to reinstall using temporary dev dir "/usr/local/lib/node_modules/stf/node_modules/jpeg-turbo/.node-gyp"
make: *** No rule to make target `../.node-gyp/6.10.2/include/node/common.gypi', needed by `Makefile'.  Stop.
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:276:23)
gyp ERR! stack     at emitTwo (events.js:106:13)
gyp ERR! stack     at ChildProcess.emit (events.js:191:7)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:215:12)
gyp ERR! System Darwin 16.3.0
gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "build" "--fallback-to-build" "--module=/usr/local/lib/node_modules/stf/node_modules/jpeg-turbo/lib/binding/node-v48-darwin-x64/jpegturbo.node" "--module_name=jpegturbo" "--module_path=/usr/local/lib/node_modules/stf/node_modules/jpeg-turbo/lib/binding/node-v48-darwin-x64"
gyp ERR! cwd /usr/local/lib/node_modules/stf/node_modules/jpeg-turbo
gyp ERR! node -v v6.10.2
gyp ERR! node-gyp -v v3.4.0
gyp ERR! not ok
node-pre-gyp ERR! build error
node-pre-gyp ERR! stack Error: Failed to execute '/usr/local/bin/node /usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js build --fallback-to-build --module=/usr/local/lib/node_modules/stf/node_modules/jpeg-turbo/lib/binding/node-v48-darwin-x64/jpegturbo.node --module_name=jpegturbo --module_path=/usr/local/lib/node_modules/stf/node_modules/jpeg-turbo/lib/binding/node-v48-darwin-x64' (1)
node-pre-gyp ERR! stack     at ChildProcess.<anonymous> (/usr/local/lib/node_modules/stf/node_modules/jpeg-turbo/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack     at emitTwo (events.js:106:13)
node-pre-gyp ERR! stack     at ChildProcess.emit (events.js:191:7)
node-pre-gyp ERR! stack     at maybeClose (internal/child_process.js:886:16)
node-pre-gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:226:5)
node-pre-gyp ERR! System Darwin 16.3.0
node-pre-gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/stf/node_modules/jpeg-turbo/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
node-pre-gyp ERR! cwd /usr/local/lib/node_modules/stf/node_modules/jpeg-turbo
node-pre-gyp ERR! node -v v6.10.2
node-pre-gyp ERR! node-pre-gyp -v v0.6.19
node-pre-gyp ERR! not ok
Failed to execute '/usr/local/bin/node /usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js build --fallback-to-build --module=/usr/local/lib/node_modules/stf/node_modules/jpeg-turbo/lib/binding/node-v48-darwin-x64/jpegturbo.node --module_name=jpegturbo --module_path=/usr/local/lib/node_modules/stf/node_modules/jpeg-turbo/lib/binding/node-v48-darwin-x64' (1)
/usr/local/lib
└── (empty)

npm ERR! Darwin 16.3.0
npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install" "-g" "stf"
npm ERR! node v6.10.2
npm ERR! npm  v3.10.10
npm ERR! code ELIFECYCLE

npm ERR! jpeg-turbo@0.4.0 install: `node-pre-gyp install --fallback-to-build`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the jpeg-turbo@0.4.0 install script 'node-pre-gyp install --fallback-to-build'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the jpeg-turbo package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     node-pre-gyp install --fallback-to-build
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs jpeg-turbo
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls jpeg-turbo
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /Users/zrck/npm-debug.log
npm ERR! code

尝试解决：
https://testerhome.com/topics/2988
https://github.com/node-inspector/v8-debug/issues/7
http://blog.csdn.net/qq_26819733/article/details/55549241?locationNum=11&fps=1
https://testerhome.com/topics/5206

最后 重装nodejs (采用官网pkg下载安装)

bogon:~ zrck$ node -v
v8.1.2
bogon:~ zrck$ npm -v
5.0.3

之后继续尝试安装

sudo npm install -g stf 

貌似正常了 ，但后来一直死循环一般的提示：

gyp WARN EACCES user "root" does not have permission to access the dev dir "/usr/local/lib/node_modules/stf/node_modules/zmq/.node-gyp/8.1.2"
gyp WARN EACCES attempting to reinstall using temporary dev dir "/usr/local/lib/node_modules/stf/node_modules/zmq/.node-gyp"

字面意思应该是没有root权限操作，尝试：

sudo chmod -R 777 /var/root

然后继续重试：sudo npm install -g stf 成功

sudo npm install -g stf
npm WARN deprecated node-uuid@1.4.8: Use uuid module instead
/usr/local/bin/stf -> /usr/local/lib/node_modules/stf/bin/stf
+ stf@2.3.0
updated 1 package in 30.743s

题外Tip:可能还会有一种可能造成无权限，是苹果系统自带的SIP安全机制

OS X El Capitan 中有一个跟安全相关的模式叫 SIP（System Integrity Protection ），它禁止让软件以 root 身份来在 Mac 上运行，在升级到 OS X 10.11 中或许你就会看到部分应用程序被禁用了，这些或许是你通过终端或者第三方软件源安装。对于大多数用户来说，这种安全设置很方便，但是也有些开发者或者高级 Mac 用户不需要这样的设置,关闭方法：
1.重启 Mac，按住 Command+R 键直到 Apple logo 出现，进入 Recovery Mode
2.点击 Utilities > Terminal
3.在 Terminal 中输入 csrutil disable，之后回车
》》》重启 Mac

但可以看到 上面有一个警告：

npm WARN deprecated node-uuid@1.4.8: Use uuid module instead

搜了下解决办法：

google了下有网友给出的答案是：the node-uuid module deprecated,u need to install uuid module.
npm install -g uuid
或者
npm uninstall --save node-uuid
npm install --save uuid
依旧无效，但不影响stf的安装，选择忽略了。

运行时报错：

/usr/local/lib/node_modules/stf/node_modules/bindings/bindings.js:91
throw err
^

Error: Could not locate the bindings file. Tried:
→ /usr/local/lib/node_modules/stf/node_modules/zmq/build/zmq.node
→ /usr/local/lib/node_modules/stf/node_modules/zmq/build/Debug/zmq.node
→ /usr/local/lib/node_modules/stf/node_modules/zmq/build/Release/zmq.node
→ /usr/local/lib/node_modules/stf/node_modules/zmq/out/Debug/zmq.node
→ /usr/local/lib/node_modules/stf/node_modules/zmq/Debug/zmq.node
→ /usr/local/lib/node_modules/stf/node_modules/zmq/out/Release/zmq.node
→ /usr/local/lib/node_modules/stf/node_modules/zmq/Release/zmq.node
→ /usr/local/lib/node_modules/stf/node_modules/zmq/build/default/zmq.node
→ /usr/local/lib/node_modules/stf/node_modules/zmq/compiled/6.10.1/darwin/x64/zmq.node
at bindings (/usr/local/lib/node_modules/stf/node_modules/bindings/bindings.js:88:9)
at Object. (/usr/local/lib/node_modules/stf/node_modules/zmq/lib/index.js:6:30)
at Module._compile (module.js:570:32)
at Object.Module._extensions..js (module.js:579:10)
at Module.load (module.js:487:32)
at tryModuleLoad (module.js:446:12)
at Function.Module._load (module.js:438:3)
at Module.require (module.js:497:17)
at require (internal/module.js:20:19)
at Object. (/usr/local/lib/node_modules/stf/node_modules/zmq/index.js:2:18)
at Module._compile (module.js:570:32)
at Object.Module._extensions..js (module.js:579:10)
at Module.load (module.js:487:32)
at tryModuleLoad (module.js:446:12)
at Function.Module._load (module.js:438:3)
at Module.require (module.js:497:17)

项目GitHub里issues里有相关问题解决方案，作者建议的是将nodejs升级到最新版本，重试之后 依旧存在问题。
后来怀疑是nodejs或者stf在安装时丢文件导致，试了下淘宝镜像

https://npm.taobao.org/package/stf

执行命令来全局安装cnpm

npm install -g cnpm --registry=[https://registry](https://registry).[npm.taobao.org](http://npm.taobao.org) 
cnpm install stf -g

。。。。。看到了曙光，进入了stf的管理页面终于打开了。
悲催的是 无法正常连接设备。

image.png

看提示感觉像是jpeg-turbo安装有问题：

npm install jpeg-turbo --registry=https://registry.npm.taobao.org

但依旧无效果
最后，重新将nodejs卸载，stf卸载，nodejs采用资源文件编译安装，stf 通过：npm install stf -g安装，成功进入网页，连接魅族note2手机无法连接：

Starting service: Intent { cmp=jp.co.cyberagent.stf/.Service } Error: Not found; no service started.

目前未能找到有效的解决办法。
其他设备：华为G750连接成功，手头一台android版pos设备连接成功。