//在交换机上做2层端口隔离，将需要隔离的端口放到一个组。
[switch1]port-isolate mode l2
[switch1]interface GigabitEthernet 0/0/1
[switch1-GigabitEthernet0/0/1]port-isolate enable group 1
[switch1]interface GigabitEthernet 0/0/2
[switch1-GigabitEthernet0/0/2]port-isolate enable group 1
//在MAC地址表中添加静态MAC地址表项，目的地址为0001-0002-0003，vlan1
的报文,从接口G0/0/5转发出去
[switch1]mac-address static 0001-0002-0003 GigabitEthernet 0/0/5 vlan 1
[switch1]display mac-address
MAC address table of slot 0:
-------------------------------------------------------------------------------
MAC Address VLAN/ PEVLAN CEVLAN Port Type LSP/LSR-ID
VSI/SI MAC-Tunnel
-------------------------------------------------------------------------------
0001-0002-0003 1 - - GE0/0/5 static -
-------------------------------------------------------------------------------
Total matching items on slot 0 displayed = 1
MAC address table of slot 0:
-------------------------------------------------------------------------------
MAC Address VLAN/ PEVLAN CEVLAN Port Type LSP/LSR-ID
VSI/SI MAC-Tunnel
-------------------------------------------------------------------------------
4c1f-cc73-55e0 5 - - GE0/0/10 dynamic 0/-
-------------------------------------------------------------------------------
Total matching items on slot 0 displayed = 1
